D-Link D-Link Wireless ADSL Router, DSL-G624T manual Virtual Server Menu and List

Page 59

DSL-G624T Wireless A DSL Router User’s Guide

Virtual Server

Use the Virtual Server menu to set up port forwarding rules in the Router. The Virtual Server function allows remote users to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-G624T will accept remote requests for these services at your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to the server on your LAN with the Private IP address you specify. Remember that the specified Private IP Address must be within the useable range of the subnet occupied by the Router.

UDP/TCP port redirection is used to direct traffic through the WAN port to the specified servers or workstations on your private network. Port redirection can also be used to direct potentially hazardous packets to a proxy server outside your firewall. For example, you can configure the Router to direct HTTP packets to a designated HTTP server in the DMZ. You can define a set of instructions for a specific incoming port or for a range of incoming ports. Each set of instructions or rule is indexed and can be modified or deleted later as needed.

Virtual server rules can be set up with complimentary features such as Firewall Rules, DMZ devices and IP Filters to improve efficiency and security. Be sure to consider how these other functions will effect the virtual server rules you have configured and enabled.

The table below describes the configuration settings presented in the Virtual Server menu.

Virtual Server Menu and List

To modify virtual server settings for any previously created rule, click the appropriate Category to the left for the set you want to configure. There are six categories, which maybe configured for each PVC. Five categaries, Games, VPN, Audio/Video, Apps and Servers have pre-defined rules which may be added to the selected Connection by clicking it and then clicking the Add button. Any of these rules may be removed by selecting it and clicking the Remove button. The User category is for user-defined rules that may be configured by selecting the User category and then clicking the Add button, which will reveal a new screen to configure, as seen below.

51

Image 59
Contents DSL-G624T Page Table Of Contents Tools About This User’s Guide Installation OverviewSetup Wizard Before You StartPacking List Installation RequirementsUsername PasswordWAN Setting Additional SoftwareEthernet NIC LAN IP addresses forDSL-G624T LAN Subnet Mask forRouter Description and Operation 802.11g WirelessRouter Features IntroductionDSL-G624T Wireless a DSL Router User’s Guide Standards Compatibility and Compliance Front Panel Display Rear Panel Connections Power insertRange Wireless LAN BasicsWireless Security Radio TransmissionAbout 802.11g Wireless Choosing the Best Location for Wireless Operation Hardware InstallationConnect Adsl Line Power on RouterFactory Reset Button Wired Network ConnectionsComputer to Router Connection Hub or Switch to Router ConnectionDSL-G624T Wireless a DSL Router User’s Guide Configuration Summary Basic Router ConfigurationConfigure Windows XP for Dhcp Configuring IP Settings on Your ComputerDSL-G624T Wireless a DSL Router User’s Guide Windows 95 and Windows Configure Windows 2000 for DhcpConfigure Windows 95 and Windows 98 for Dhcp WindowsWindows NT 4.0 Workstations Configure Windows ME for DhcpConfigure Windows NT 4.0 for Dhcp Windows MEEnter Password Access the Configuration ManagerLogin to Home Web Manager First Time Log On Configure the RouterUsing the Setup Wizard Using the Setup Wizard Choose Time Zone Using the Setup Wizard Choose Connection Type Using the Setup Wizard For PPPoE/PPPoA connections Using the Setup Wizard For Dynamic IP Address connections Using the Setup Wizard For Static IP Address connections Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard Finish and Restart Home Wireless LAN SetupWireless Settings menu Wireless Security Configure Basic Wireless SettingsConfigure WEP Wireless Security Security Options for WirelessWEP Encryption Setup Encryption KeysConfigure WPA Security for Wlan Configure WPA SettingsConfigure WPA-PSK Security for Wlan WAN Settings Menu PPPoE / PPPoA Configure WAN ConnectionPPPoE and PPPoA Connection for WAN Firewall Default RoutePPPoE/PPPoA Parameters Description User NameDynamic IP Address Connection for WAN WAN Settings for Dynamic IP Address ConnectionCloned MAC Address Dynamic IP Parameters DescriptionBridged Connection for WAN WAN Settings Menu Bridge ModeStatic IP Address for Connection WAN WAN Settings Static IPGateway Address Static IP Parameters DescriptionIP Address Subnet MaskATM QoS Parameters Description ATM Settings for WAN connection PPPoE/PPPoA menuService Category ATM Traffic ShapingVirtual Circuit ATM VC SettingsATM VC Settings in WAN connection menu ATM VC Parameters DescriptionConfigure LAN IP settings LAN IP SettingsUse the Router for Dhcp Dhcp Server Settings for the LANConfigure Dhcp Server settings for the LAN Static IP Assignment for LAN Static IP Settings for the LANDisable the Dhcp Server Dhcp Settings menu with Dhcp disabledConfigure DNS Settings DNS Server SettingsDynamic DNS Dynamic DNS ConfigurationSave and Reboot menu Save Settings and RebootAdvanced Router Management UPnP Enable UPnP MenuVirtual Server Menu and List Virtual ServerPrivate IP Rule Management windowParameter Description Rule NameLAN Clients window LAN ClientsSnmp Management window SnmpSource IP Filters Configuration MenuFilters Action Destination IPSource Port Destination PortBridge Filters window Bridge FiltersRouting Table RoutingDMZ DMZ IP address configurationFirewall Firewall Configuration MenuDynamic Routing RIP menu RIPPPP PPP Connection settings menuAdsl Adsl Modulation ConfigurationATM VCC ATM Virtual Circuit configuration menuQoS QoS Configuration screenWireless Management Wireless ManagementConfigure Wireless Access Control Configure Multiple SsidWireless LAN Performance settings Wireless PerformanceTools System Tools administrative functionsRemote Web And Telnet Access window Change System PasswordRemote Web Management and Telnet Access Administrator Settings change password menuTime Time & Date ConfigurationRemote Log Remote Log Settings windowSystem Restore Factory Default SettingsSave System Settings and Restore Defaults Firmware Firmware UpgradePing Test Miscellaneous Miscellaneous Configuration menuTest Diagnostics Test MenuStatus Information Device Information display Device Information DisplayDhcp Clients window Dhcp ClientsView Log window LogTraffic Adsl Status information Technical Specifications Wireless Certification Wireless ModulationWireless Data Rates Media Access ProtocolAssigning Network IP Addresses IP Address SetupUsing the Default IP Address IP Setup Example #1Changing the IP Address of the Router Using DhcpIP Setup Example #2 IP Addresses IP Concepts255.0.0.0 255.255.0.0 255.255.255.0 Subnet MaskMicro filters Micro filter InstallationMicro Filters and Splitters Split Line Filter

DSL-G624T, D-Link Wireless ADSL Router specifications

The D-Link Wireless ADSL Router, DSL-G624T, is a versatile and powerful networking solution designed for home and small office environments. This router combines the functionality of ADSL modem capabilities with the convenience of wireless connectivity, making it an ideal choice for users looking to establish a reliable internet connection without the hassle of multiple devices.

One of the primary features of the DSL-G624T is its ADSL2+ support, which allows download speeds of up to 24 Mbps. This high-speed capability ensures that users can surf the web, stream videos, and engage in online gaming with minimal lag and buffering. The built-in ADSL modem means that users can connect directly to their ISP with no need for additional hardware, simplifying setup and reducing clutter.

In terms of wireless technology, the DSL-G624T supports the 802.11g Wi-Fi standard, which offers a maximum theoretical speed of 54 Mbps. This allows for a stable and speedy wireless connection throughout the home or office, supporting multiple users and devices simultaneously. The router also features Wireless Distribution System (WDS) functionality, enabling users to extend the wireless network easily by connecting additional routers or access points.

Security is a crucial aspect of any networking device, and the DSL-G624T does not disappoint. It includes advanced security features such as WPA/WPA2 encryption, ensuring that users' data remains safe from unauthorized access. Additionally, the router supports MAC address filtering and firewall protection, providing an additional layer of defense against potential threats.

The DSL-G624T is equipped with four 10/100 Mbps Ethernet ports, allowing users to connect wired devices such as desktop computers, gaming consoles, or network-attached storage directly to the router. This is particularly useful for systems that require stable connections, such as for gaming or streaming high-definition content.

Installation and management of the DSL-G624T is user-friendly, thanks to its web-based interface. Users can easily configure settings, manage connected devices, and monitor their network's performance. The provision of DHCP support and easy-to-follow wizards streamlines the setup process for users of all technical levels.

In conclusion, the D-Link Wireless ADSL Router, DSL-G624T, combines high-speed ADSL modem capabilities with robust wireless networking features. With its solid performance, essential security measures, and ease of use, this router is a fantastic choice for users looking to enhance their internet connectivity at home or in small office environments.