SECTION
Beginning Assembly
Your safety is important! Complete the assem- bly in the order provided in this manual. Then read the rest of the manual before attempting any type of sanding operation.
Disconnect power to the machine for the assem- bly process. Failure to do this may result in serious personal injury.
Air Line Installation
To install the air line:
1.Connect the hose from your air compressor to the air inlet (Figure 9) on the regulator.
Regulator
Knob
Air ON/OFF
Lever
(Open Position)
Air Inlet
Figure 9. Air inlet located on regulator.
2.Move the red handle on the regulator to the open position (parallel with the air inlet).
3.Lift the regulator knob (Figures 9 and 11) and turn it until the air pressure gauge reads 75 PSI. Note: Turn the knob clockwise to increase the air pressure and counterclock-
wise to lower the air pressure.
3: SETUP
Unpacking
Wide | belt sanders are | |
heavy | machines often | |
weighing approximately | ||
one ton. Personal injury | ||
can occur if the machine | ||
is moved without appro- | ||
priate machinery. Use a | ||
crane | or | forklift when |
moving | or lifting the | |
machine. |
| |
The Model G0445/G0582/G9962Z/G9962ZX | ||
was carefully packed when it left our warehouse. | ||
If you discover the machine is damaged after you | ||
have signed for delivery, please immediately call | ||
Customer Service at (570) | ||
Save the containers and all packing materials for | ||
possible inspection by the carrier or its agent. | ||
Otherwise, filing a freight claim can be difficult. | ||
When you are completely satisfied with the con- | ||
dition of your shipment, you should inventory the | ||
contents. |
|
|
NOTICE | ||
A parts diagram and parts list are located | ||
near the end of the manual. Use the diagram | ||
and list to identify missing parts or to sup- | ||
plement the assembly instructions provided | ||
in this manual. |
|
|
4.Push the regulator knob down until it snaps.
G0445/G0582/G9962Z/9962ZX Wide Belt Sander |