Grizzly G0459 Operations, Operation Safety Switch/Lockout, To turn the switch on and OFF

Page 17

SECTION 4: OPERATIONS

Operation Safety

 

Switch/Lockout

 

 

 

 

 

 

Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose clothing and long

hair away from moving machinery.

NOTICE

If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

G0459 12" Drum Sander

The ON/OFF switch can be locked-out to prevent unauthorized use.

To turn the switch ON and OFF:

1.To turn the sander ON, flip the switch up.

2.To turn the sander OFF, press the switch down.

3.To lock-out the switch, remove the yellow key from the switch housing, as shown in Figure 8. Place the key in a safe place.

Figure 8. Locking-out.

-15-

Image 17
Contents Model G0459 Drum Sander Safety Label Placement Table of Contents Warranty and Returns Contact Info IntroductionForeword Machine Data Sheet Identification Safety Instructions for Machinery SafetyAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety for Drum Sanders 110V Operation Circuit RequirementsSet Up Safety SET UPItems Needed for Set Up UnpackingSite Considerations InventoryFloor Load Working ClearancesMounting Placing SanderComponents and Hardware Needed Qty To mount the drum sander to a bench topDust Collection Installing Crank HandleTo mount the handwheel To connect the dust port to a dust collectorTest Run Recommended AdjustmentsOperations Operation Safety Switch/LockoutTo turn the switch on and OFF To set the depth of cut To adjust the conveyor speedDepth of Cut Variable Speed To sand a workpiece SandingSanding Tips Grit Class Usage Paper ReplacementChoosing Sandpaper PRO-STICKSanding Pad AccessoriesSize Model H1300 H1298 G7984 H2347 H0736G3119-4 x 21⁄2 Adapter G3124-Wire Hose Clamps 21⁄2 G3123-Flexible Hose 21⁄2 xG1163-1HP Dust Collector G7313-Tool TableCleaning MaintenanceSchedule LubricationTable lift screws Motor & Electrical ServiceTroubleshooting Sanding Operations Increase pressure roller pressure Tension Belt ServiceGauge Blocks To adjust V-belt tension Removal/ReplacementPulley Alignment To align the pulleysTensioning Conveyor Tensioning TrackingTracking To tension the conveyorDrum parallel to conveyor belt G0459 12 Drum Sander Drum AdjustmentsDrum perpendicular to feed direction To adjust the pillow block bearingsTo adjust the pressure rollers to the factory setting Factory SettingPressure Roller HeightTo calibrate the scale pointer Scale Pointer CalibrationTable Lift Screws To adjust the table lift screwsTo replace the conveyor belt Conveyor Belt ReplacementTo Step Drum sander disassembled to StepBrass Shims Page Page Switch Box Wiring Motor WiringElectrical Components Feed Motor CapacitorWiring Diagram Frame Parts Breakdown Drum and Conveyor Parts Breakdown Description Parts ListDust Scoop 214 215 213 212 216 217 209 218 Safety Label Placement and Parts ListWarranty and Returns Comments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCPage Call Today For a Free Full Color Catalog