Inventory
After all the parts have been removed from the two boxes, you should have the following items:
Box 1: (Figure 3) | Qty | |
A. | Drum Sander | 1 |
B. | Crank Handle | 1 |
C. | 21⁄2" Dust Port | 1 |
D. | 3mm Hex Wrench | 1 |
A
B | D |
C
Figure 3. G0459 Inventory.
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.
Site Considerations
Floor Load
Refer to the Machine Data Sheet for the weight and footprint specifications of your machine. Some workbenches may require additional rein- forcement to support both the machine and the workpiece.
Working Clearances
Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your new machine. See Figure 4 for the minimum working clearances.
26.5"
24"
Figure 4. Minimum working clearances.
Unsupervised children and visitors inside your shop could cause serious per- sonal injury to themselves. Lock all entrances to the shop when you are away and DO NOT allow unsupervised children or visitors in your shop at any time!
G0459 12" Drum Sander |