Placing Sander
The Model G0459 is a heavy machine (139 lbs.). DO NOT
To place the sander in a permanent location:
1.With an assistant's help, lift the sander out of the box and move it to your predetermined location.
Mounting |
|
Components and Hardware Needed: | Qty |
Lag Bolts | 4 |
Flat Washers 5⁄16 (Not Included) | 4 |
To mount the drum sander to a bench top:
1.Place the sander on a bench top capable of holding approximately 140 lbs. plus the weight of the workpiece. Make sure the sur- face is flat and stable.
2.Drill four 1⁄4" holes on the bench, using the holes in the base as a guide.
3.Using a 1⁄2" wrench, bolt the base to the bench top with 5⁄16" lag bolts and flat washers as shown in Figure 5.
Figure 5. Installing sander onto bench top.
G0459 12" Drum Sander |