Grizzly G0459 owner manual Table lift screws

Table Lift Screws: These should be lubricated with lithium grease every six months.

Clean the table lift screws (Figure 21) and rub lithium grease onto the threads. Move the table up or down to spread the grease thoroughly over the threads.

Figure 21. Table lift screws.

-22-

Failure to routinely inspect your drum sander for damage and wear could result in unsatis- factory work results, premature component or machinery failure, or operator injury. We recommend you create a checklist for routine inspection and maintenance. Remember to always disconnect the drum sander from its power source before attempting to inspect, adjust, or repair this machine!

G0459 12" Drum Sander