Grizzly G0574 Table Tilt Table Height, Table height adjustment G1140 Edge Sander

Table Tilt Table Height

1.Loosen the lock handles, tilt the working table to the desired angle and retighten the lock handles. See Figure 21.

2.It may be necessary to re-adjust the working table closer to the platen. Not more than a 1⁄4'' gap should exist between the platen and the working table.

Figure 21. Table tilt adjustment.

1.Loosen lead screw lock handle and stabiliz- ing shaft lock bolt. See Figure 22.

2.Turn hand wheel and position working table to desired height.

3.Retighten lock handle and lock bolt.

Figure 22. Table height adjustment.

-16- G1140 Edge Sander