Harbor Freight Tools 38123 operating instructions

Page 1

COMBINATION 4 X 6 INCH

BELT SANDER

38123

ASSEMBLY AND OPERATING INSTRUCTIONS

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2005 by Harbor Freight Tools® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

MANUAL REV 05/05

Image 1

Contents 38123 For technical questions and replacement parts, please callGeneral Safety Rules SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetySpecific Safety Rules ServiceTool USE and Care Industrial applications must follow Osha requirements Grounded Tools Tools with Three Prong Plugs GroundingExtension Cords Double Insulated Tools Tools with TWO Prong PlugsSee Figure C SymbologyTo Secure The Sander Base Assembly To a Workbench Assembly InstructionsTo Mount The Table Assembly UnpackingFigure F To Adjust The Worktable For Vertical Sanding To Install The BackstopOperating Instructions See Figure G SKU For technical questions, please callSee Figure To Level The Worktable AssemblySee Figure J See Figure K To Install And Adjust The Sanding BeltSanding Methods Surface Sanding On The Sanding Belt ON/OFF Locking SwitchSanding Methods Sanding Curved Edges Sanding Methods End Sanding On The Sanding BeltSymptom Probable Cause Remedy TroubleshootingDo not use damaged equipment INSPECTION, MAINTENANCE, and CleaningTo replace the timing Drive Belt See Figure Q, nextSee Figure Q Please Read the Following CarefullyParts List Assembly Drawing