TROUBLESHOOTING
SYMPTOM | PROBABLE CAUSE | REMEDY |
|
|
|
Sander does not operate. | Not plugged into electrical outlet. | Plug into electrical outlet. |
| Switch Key not inserted. | Insert Switch Key. |
| ON/OFF Locking Switch defective. | Replace Switch. |
| Motor or wiring problem. | Take to qualified technician. |
|
|
|
Motor slows when sanding. | Timing Belt too tight. | Decrease tension. |
| Applying too much pressure on | Apply less pressure on workpiece. |
| workpiece. |
|
|
|
|
Sanding Belt runs off Drums. | Not tracking properly. | Adjust tracking. |
|
|
|
Sander makes excessivenoise. | Timing Belt too tight. | Decrease tension. |
| Bearings need oil. | Oil Bearings. |
|
|
|
Wood Burns while sanding. | Sanding Pad or Belt is loaded with | Clean or replace Sanding Pad or |
| debris. | Belt. |
|
|
|
SKU 38123 | For technical questions, please call | Page 16 |