Harbor Freight Tools 38123 operating instructions Parts List

Page 19

PARTS LIST

For technical questions, please call 1-800-444-3353.

Page 19

Image 19

Contents 38123 For technical questions and replacement parts, please callWork Area SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetySpecific Safety Rules ServiceTool USE and Care Industrial applications must follow Osha requirements Grounded Tools Tools with Three Prong Plugs GroundingExtension Cords Double Insulated Tools Tools with TWO Prong PlugsSee Figure C SymbologyUnpacking Assembly InstructionsTo Secure The Sander Base Assembly To a Workbench To Mount The Table AssemblyFigure F See Figure G SKU For technical questions, please call To Install The BackstopTo Adjust The Worktable For Vertical Sanding Operating InstructionsSee Figure To Level The Worktable AssemblySee Figure J See Figure K To Install And Adjust The Sanding BeltSanding Methods Surface Sanding On The Sanding Belt ON/OFF Locking SwitchSanding Methods Sanding Curved Edges Sanding Methods End Sanding On The Sanding BeltSymptom Probable Cause Remedy TroubleshootingSee Figure Q, next INSPECTION, MAINTENANCE, and CleaningDo not use damaged equipment To replace the timing Drive BeltSee Figure Q Please Read the Following CarefullyParts List Assembly Drawing