Clarke 1600 manuel dutilisation 120VOLTMACHINES, Extensioncords

Page 18

Grounded

Outlet

Grounded

Outlet

GroundingBox

Pin

(United States, Mexico and Canada)

Figure 7

Toma corriente con polo de tierra.

 

Tapa del

 

toma

Terminal

corriente

con polo

de tierra

de tierra.

 

 

 

 

Figure 7a

Prise de courant avec mise à la terre

 

Boîte de

Broche de mise

sortie

mise à la

à la terre.

terre

 

 

 

 

Figure 7b

120VOLTMACHINES

Instructions for connection to the power

supply and the electrical ground.

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding conductor and ground- ing plug. The plug must be inserted into an appropriate oulet that is properly installed and grounded in accor- dance with all local codes and ordinances.

WARNING: Improper connection of the equip- ment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120 volt circuit and has a grounding attachment plug that looks like the plug illustrated in Fig. 7. Make sure that the product is connected to an outlet having the same configuration as the plug. No adaptor should be used with this product.

WARNING: Topreventpossibleelectricshock, protect the machine from rain. Keep the machine in a dry building.

WARNING: Topreventpossibleelectric shock, always use a 3-wire electrical system connected to the electrical ground. For maximum protection against electrical shock, use a circuit that is protected by a ground fault circuit interrupter. Consult your electrical contractor.

WARNING: Do not cut, remove or break the ground pin. If the outlet does not fit the plug, consult your electrical contractor.

WARNING: Have worn, cut or damaged cords replaced by an authorized service person.

EXTENSIONCORDS

Use only an approved extension cord with three conductors, a plug with three terminals, and a connector body with three holes. The machine has a power cord with wire size 14 AWG (AWG means American Wire Gauge).

WARNING: If you use an extension cord, use an extension cord with minimum wire size 12 AWG. Do not use an extension cord longer than 50 feet. Do not join two extension cords.

Page -18 -

Clarke® American Sanders Operator's Manual - Sander 1600 120V

Image 18
Contents Sander Contents of this Book Libro DE Instrucciones LEA Este Libro IndiceManuel D’UTILISATION Lisez CE Manuel IndexOperatorsafetyinstructions Avertissement AdvertenciaMachineintroduction SanderInstrucciones Para LA Seguridad DEL Operador AvertissementPresentacion DE LA Maquina Nota Esta máquina es de uso comercialModelos Sander Avertissement Presentation DE LA Machine PrécautionModèles Sander Model Sander Modelo SanderModèle Sander Sanding Cuts and Sandpaper HOW to Prepare the Machine for OperationHow To Install The Sandpaper Initial CutFases de pulimentado y tipo de papel abrasivo Installation du papier abrasifPhases de ponçage et papier abrasif Fase inicialGrain Use Grano Empleo How To Install The Brush Or Pad Driver How To Adjust The HandleHowtoprepare Themachinefor Operation Preparacion DE LA Maquina Para Trabajar 120VOLTMACHINES ExtensioncordsInstrucciones Para LA Conexion Electrica DE LA Maquina MAQUINAS120VMACHINES120V Instructions Pour LE Raccordement ElectriqueHOW to Operate the Machine Mantenimiento Mise EN Service DE LA MachineFuncionamiento DE LA Maquina Dominio DE LA MaquinaClarke American Sanders Operators Manual Sander 1600 Sander 120V/60Hz Switches Maintenance Of The MotorMantenimiento del motor Entretien du moteurSander Assembly Drawing 2/03 See Optional Accessories Table Above Sander Assembly Drawing Parts List 2/03 Description QtyOptional Accessories Available Description Description QtySander Gearbox Assembly and Parts List 416 1114 1315 Description QtyClarke American Sanders Operators Manual Sander 1600 Page Product Support Branches Clarke American Sanders U. S. Warranty Highway 265 Springdale, Arkansas