Chicago Electric 41213 operating instructions Power tool use and care

Page 4

c.Avoid accidental starting. Ensure the switch is in the off-position before plug- ging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e.Do not overreach. Keep proper footing and balance at all times. This en- ables better control of the power tool in unexpected situations.

f.Dress properly. Do not wear loose clothing or jewelry. Keep your hair, cloth- ing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g.If devices are provided for the connection of dust extraction and collection fa- cilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.

4.Power tool use and care

a.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be re- paired.

c.Disconnect the plug from the power source of the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d.Store idle power tools out of the reach of children and do not allow per- sons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many ac- cidents are caused by poorly maintained power tools.

f.Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SKU 41213

For technical questions, please call 1-800-444-3353.

Page

Image 4
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSave This Manual For technical questions, please callGeneral Safety Rules Work area safetyElectrical safety Personal safetyPower tool use and care Specific Safety Rules . ServiceVibration Hazard SKU For technical questions, please callSKU For technical questions, please call For technical questions, please call Grounded Tools Tools with Three Prong Plugs GroundingDouble Insulated Tools Tools with Two Prong Plugs See Outlets for 2-Prong Plug Extension CordsSee Table a Symbology FeetSpecifications Set Up InstructionsList of contents AssemblyFor technical questions, please call Controls Operating InstructionsPolishing For technical questions, please call Sanding Cleaning, maintenance, and lubrication Maintenance And ServicingTroubleshooting Parts List Description QtyAssembly Diagram Limited 90 DAY Warranty Record Product’s Serial Number Here