4.Do not force the Polisher/Sander. This tool will do the work better and safer at the speed and capacity for which it was designed. Do not force the pads into the vehicle being waxed/polished. Apply moderate pressure, allowing the Bonnet to rotate freely without being forced.
.When waxing/polishing a vehicle, do not operate the vehicle’s engine in an enclosed area. Carbon monoxide is a colorless, odorless, vapor emitted from a vehicle’s running engine that may cause severe injury or death if inhaled.
.Never lay the Polisher/Sander down until the Polishing Pad (2) has come to a full stop. The Backing Pad can grab the surface and pull the tool out of your control.
7.Make sure the vehicle being waxed/polished is free from burrs and any other foreign matter which could damage the tool.
.Always unplug the Polisher/ Sander from its electrical outlet before per- forming any inspection, maintenance, or cleaning procedures.
9.When sanding, only use 7” sanding pads with a hook and loop back that at- taches securely to the Backing Pad.
10.Connect to a GFCI. Always connect the Line Cord to a Ground Fault Circuit Interrupter (GFCI) protected electrical outlet.
11.Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury.
12.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
13.Never use accessories rated for less than 3500 RPM.
14.
WARNING! Avoid serious injury. Never install carbide tipped or steel circular saw blade for use on this Sander/Polisher. Never install a wood carv- ing blade, carving disc with saw chain cutters, or a cutting carving disc on this
Sander/Polisher. Never install abrasive cutoff discs and wheels, flap wheels, wire
brushes, or wire wheel brushes.
(1)
1. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
SKU 41213 | For technical questions, please call | Page |