Sanyo CH1872, CH2472 To unmount indoor unit, Do not supply power to, Unit or operate it until all

To unmount indoor unit

Press the 2 ▲ marks on the lower part of the indoor unit and unlatch the tabs. Then lift the indoor unit and unmount. (Fig. 42)

3-10. Drain Hose

a)The drain hose should be slanted downward to the outdoors. (Fig. 43)

b)Never form a trap in the course of the hose.

c)If the drain hose will run in the room, insulate the hose with insulation* so that chilled condensation will not damage furniture or floors. (Fig. 44)

*Foamed polyethylene or its equivalent is recom- mended.

WARNING	Do not supply power to the
	unit or operate it until all
	tubing and wiring to the out-
	side unit are completed.

Risk of Electric Shock

Push

Fig. 42

	Slant
Indoor	Drain
unit
	hose

Fig. 43

Condensation

Insulation material (Locally purchased) must be used.

Fig. 44

15