Schumacher 94070A, 98026071, 00-99-000985/1009 manual ON-OFF Thermal Indicator

Page 13

ON-OFF – THERMAL INDICATOR

To turn the power on to the welder, push the main switch to ON. Your welder has a lighted main switch. This light will come on if the welder has overheated. The light indicates that a thermostat has shut off the power within the welder. Once the welder has cooled, the thermostat will turn the welder back on and the light will go out. Over heating is usually caused by exceeding the welder duty cycle.

DUTY CYCLE

The duty cycle rating of a welder is a measure of how long the welder can weld and how long it must be rested and cool. It is expressed as a percentage of ten minutes (the industry recognized cycle time) and represents the maximum welding time allowed, with the balance of the ten minute cycle required for cooling.

INTERNAL THERMAL PROTECTION

If you exceed the duty cycle of your welder, an internal thermal protector will open and shut off all welder functions. If this ever happens to you, do not shut off the welder! Leave it turned on. After cooling a while, the thermal protector will automatically reset and the welder will function again. However, you should wait at least 10 minutes after the thermal protector opens before resuming welding, even if the protector resets itself sooner, or you may experience less than specified duty cycle performance.

CAUTION! DO NOT CONSTANTLY EXCEED THE DUTY CYCLE OR DAMAGE TO THIS WELDER WILL RESULT!

CONNECT WELDER GROUND

Attach the ground clamp to the work piece making sure that the work piece is cleaned of dirt, oil, rust, scale, oxidation, and paint at the point of connection. It is best to connect the ground clamp directly to the work piece and as close to the weld as possible. If it is impractical to connect the ground clamp directly to the work piece, connect it to metal that is securely attached to the work piece, but not electrically insulated from it. Also, make sure this other metal is of similar or greater thickness than that of the work piece.

CAUTION! RISK OF ELECTRONIC COMPONENT DAMAGE!

If the ground clamp is being connected to an automobile or other equipment with on-board computer systems, solid state electronic controls, solid state sound systems, etc., do not weld until disconnecting the cable from the battery that is attached to chassis ground. Failure to do so may result in electronic component damage!

• 10 •

Page 12 Page 14
Image 13
Page 12 Page 14
Contents ARC Welder Soudeur D’ARC Page Table DES Matières Shock Hazards General Safety PrecauTIONsEMF Information Fire Hazards Flash HazardsPage Fume Hazards Additional Safety InformationWelder Performance Introduction Description Power Requirements SpecificationsExtension Cord USE Installing the Electrode HolderOperation Getting to Know Your NEW Welder Installing the Ground ClampControls & Their Functions ON-OFF Thermal Indicator General Welding Information Preparations for Welding Setting UP the Work PieceSelecting The Proper Electrode Striking The Arc Low vs High Voltage Welding ElectrodesReplacement Parts List General MaintenanceHandle Electrode HolderPage Risques DE Chocs Électriques Général Précautions de SécuritéPage Consignes relatives aux stimulateurs cardiaques Information SUR LES Champs ÉlectromagnétiquesRisques D’ÉTINCELLES Risques D’INCENDIE Page Risques DE Fumées Toxiques Consignes DE Sécurité Supplémentaires Paramètres Électriques DE Fonctionnement Exécution DE SoudeurUtilisation D’UNE Rallonge Électrique Fixation DE LA Mise À LA Terre Raccordement DE LA Pince ÉlectrodeUtilisation Découvrez Votre Nouveau Poste DE Soudure Commandes DU Panneau AvantFacteur DE Marche Disposition DES Pièces À Souder ’INFORMATION Générale DE Soudure Préparations AU SoudagePréparation Du Joint Choix de l’électrode correcte Page Entretien DU Poste À Souder Amorçage De L’arcPoignée Liste DE Pièces DétachéesDétente D’ÉLECTRODE Attache DE Terre

00-99-000985, 00-99-000985/1009, 94070A, 98026071 specifications

The Schumacher 98026071,94070A,00-99-000985/1009,00-99-000985 represents a blend of innovation and functionality in the automotive battery maintenance and charging sector. This product is designed to serve both professional automotive technicians and everyday users seeking reliable battery solutions.

One of the standout features of the Schumacher 98026071 model is its advanced microprocessor technology. This intelligent system provides precise diagnostic information, which ensures optimal battery charging through a tailored approach that adapts to the specific needs of the battery being serviced. This means users can expect enhanced charging efficiency and ultimately a longer battery lifespan.

The Schumacher 98026071 also includes an automatic shut-off feature, safeguarding against overcharging and potential damage. This is particularly beneficial for the modern user who may not always monitor the charging process. The model supports both standard lead-acid and AGM batteries, showcasing versatility that caters to a wide range of vehicle types and user preferences.

In terms of charging speed, the Schumacher 98026071 can handle a variety of charging levels, from slow trickle charging to fast charging options. This flexibility is invaluable, as it allows users to select the appropriate mode based on their specific requirements—whether they need a quick boost or a full recharge.

Portability is another significant advantage with this model. Its compact design allows for easy transportation and storage, making it a practical choice for both garage use and on-the-road emergencies. Furthermore, the product is built with user-friendly controls and an LED display that allows users to monitor charging progress effectively.

Safety is paramount in Schumacher’s design, and this model incorporates multiple safety features, such as reverse polarity protection, which prevents damage to both the charger and the battery in case of incorrect connections.

Overall, the Schumacher 98026071,94070A,00-99-000985/1009,00-99-000985 is a high-quality battery charger that stands out through its innovative technologies, comprehensive safety measures, and user-friendly design. This makes it an ideal choice for anyone in need of reliable battery maintenance, ensuring that vehicles remain operational and dependable.
Top Page Image Contents