Sanyo C4232, CL4232 Air Discharge Chamber for Top Discharge, Wind Shield for CL Model, General

Air Discharge Chamber for Top Discharge

Installã the air-discharge chamber in the field when: it is difficult to keep a space of minimum 2 ft. between the air-discharge outlet and

ãthe obstacle.

the air-discharge outlet is facing the side- walk and discharged hot air can annoy the passers-by. Refer to Fig. 5.

Wind Shield for “CL” Model

IMPORTANT

It is recommended to use wind shields for “CL” model (Fig. 6). “CL” model is designed to use in low outdoor temperature conditions.

General

When the outdoor unit is installed in a position exposed to strong wind (like seasonal winds with low air temperature in winter), wind shield must be installed on the outdoor unit.

This unit is designed so that the fan of the outdoor unit runs at low speed when the air conditioner is operated at low outdoor air temperatures. When the outdoor unit is ex- posed to strong wind, the system pressure drops because of the freeze protector.

For outer dimensions of wind shield, please see Fig. 7.

Air discharge

0426_C_I

Fig. 5

Wind shield

(air discharge side)

Front

0935_C_I

Fig. 6

Recommended outer dimensions of wind shield (field supply)

11-13/16"

23-5/16"

CL3032, 3632

CL4232

5-5/32"

1352_C_I

CL2432

Fig. 7

5-3/16"

0936_C_I