Taping the Tubes, Finishing the Installation

Important

Because capillary tubing is installed in the outdoor unit, both the wide and narrow tubes of this air conditioner become cold. Therefore, to prevent heat loss and wet floors due to dripping of condensation water, both tubes must be well insulated with proper insulation material. The thickness of the insulation material should be a min. 8 mm (5/16").

7-7. Taping the Tubes

(1)At this time, the refrigerant tubes (and electrical wiring if local codes permit) should be taped with armoring tape in 1 bundle. To prevent the con- densation from overflowing the drain pan, keep the drain hose separate from the refrigerant tubing.

(2)Wrap the armoring tape from the bottom of the outdoor unit to the top of the tubing where it enters the wall. As you wrap the tubing, overlap half of each previous tape turn. (Fig. 7-9)

(3)Clamp the tubing bundle to the wall, using 1 clamp about every 3 feet.

NOTE

Do not wind the armoring tape too tightly since this will decrease the heat insulation effect. Also ensure that the condensation drain hose splits away from the bundle and drips clear of the unit and the tubing.

7-8. Finishing the Installation

After finishing insulating and taping over the tubing, use sealing putty to seal off the hole in the wall to prevent rain and draft from entering. (Fig. 7-10)

	Insulation
Thickness:	Thickness:
Min. 5/16 in.	Min. 5/16 in.
	Narrow tube
Wide tube	0999_C_I

Clamp

Insulated tubes Drain hose

0136_M_I

Fig. 7-9

Apply putty here

Tubing

0137_C_I

Fig. 7-10

23S4359128

PNR-XS2432, XS1852 specifications

The Sanyo XS1852 and PNR-XS2432 are dual offerings that exemplify cutting-edge technology in the realm of compact air conditioning systems. Sanyo, a trusted brand in HVAC solutions, has built these units to cater to both efficiency and comfort, making them ideal for residential and commercial applications.

The Sanyo XS1852 is a wall-mounted split air conditioning system known for its sleek design and powerful performance. It features advanced inverter technology, allowing for variable speed operation. This means the compressor adjusts its speed based on the cooling demand, resulting in significant energy savings and enhanced comfort. The XS1852 operates quietly, producing minimal noise, making it suitable for bedrooms and quiet spaces.

One of the standout features of the XS1852 is its intelligent air distribution. The unit is equipped with multiple airflow settings and swing functions that ensure the air is evenly distributed throughout the room. This feature helps maintain a consistent temperature, avoiding hot or cold spots. The XS1852 also boasts a user-friendly remote control and an intuitive LED display, making it easy to adjust settings even from a distance.

Meanwhile, the PNR-XS2432 is designed for larger spaces, with robust cooling capacities. This ceiling cassette model offers a discreet installation option, fitting seamlessly into various environments. It features a four-way airflow system that enables effective air distribution from all sides, ensuring maximum comfort even in larger rooms. The PNR-XS2432 is also designed with a high energy efficiency rating, providing both cost savings and reduced environmental impact.

Both units incorporate advanced filtration technology, including a multi-layer filtration system that captures dust, allergens, and odors. This feature not only enhances air quality but also contributes to a healthier indoor environment.

Another important characteristic of these models is their compatibility with smart home systems. Users can easily connect these units to their smart devices, allowing remote access and control via mobile applications. This added convenience makes it possible to schedule cooling cycles and monitor energy usage, promoting smarter energy consumption.

In summary, the Sanyo XS1852 and PNR-XS2432 represent a blend of innovative technology, energy efficiency, and user-centric design. They are ideal solutions for anyone seeking reliable and effective air conditioning options that enhance comfort while minimizing environmental impact.