L. | ASSEMBLY INSTRUCTIONS |
Wheel Charger Assembly Instructions: |
|
NOTE: Charger must be assembled before operating | |
Parts | Tools necessary |
(2) | 5/16" wrench |
(2) | 3/8" wrench |
(2) wheels | Hammer |
(2) axle caps | Screwdriver |
(2) axle brackets |
|
(1) handle |
|
(1) mounting foot |
|
HUBS MUST | Fig. B |
| |
FACE IN |
|
AXLE BRACKET
Fig. A
Fig. D
Fig. E
AXLE CAP
Hubs must face in FIG. A; Axle bracket FIG. D & B.; Axle cap FIG. E. First place the charger topside down on a flat surface.
Next mount the mounting foot FIG. A with (2)
Next pound the axle firmly into an axle cap using a hammer FIG. B. Next slide the wheels onto the axle, hubs must face in, FIG. C. Next pound the other axle cap onto the other end of the axle.
Next place the axle assembly onto the bottom of the charger as shown in FIG. C.
Mount the axle to the bottom of the charger using (2)
Next turn the battery charger right side up onto its foot and wheels.
Remove the (2) top screws from each side of the charger, line up the handle and reinstall the screws FIG. E.
553 | 6 |