TECHNICAL INFORMATION
Models No. | AR410HR |
PRODUCT
P 1/20
Description | Pneumatic Auto Feed Coil Screwdriver |
CONCEPT AND MAIN APPLICATIONS
Model AR410HR is a pneumatic screwdriver powered by high pressure air. Drives coil type collated drywall screws exactly to depth and fastens plasterboard securely to wood/metal drywall stud.
Its main benefits are:
Compact body for easy handling and high maneuverability
High power allowing to fasten plasterboard securely to metal stud of even 0.8mm thick steel plate without unseated screw
Optimum for operation in job sites among residential area thanks to
Rigid contact arm enabling to make fine finish constantly
Specification
L
H |
|
W2 | W1 |
Dimensions: mm | |
Length (L) | 296 |
Width 1 (W1) | 142 |
Width 2 (W2) | 116 |
Height (H) | 305 |
Width 1: with Hook |
|
Width 2: without Hook |
|
| Screw type |
| Plastic sheet collated drywall screws | |
|
| (coil type) | ||
|
|
| ||
Screw | Shank diameter: | Wood backing | 3.8 (Coarse thread) | |
Metal backing | 3.5 (Fine thread) | |||
| mm | |||
| Length: mm |
| 25, 28, 32, 41 | |
| Screws per coil |
| 100 screws | |
|
|
|
| |
Magazine capacity |
| 100 screws | ||
|
| |||
Operating air pressure: MPa | 1.76 - 2.26 | |||
| (kgf/cm2) | (18 - 23) | ||
Pressure regulator valve |
| Yes | ||
|
|
| ||
Fire mechanism |
| |||
|
|
| ||
Driving depth adjustment |
| Yes (by dial) | ||
Trigger |
| Yes | ||
Net weight: kg |
| 1.9 | ||
|
|
|
| |
*1: Screws can be driven one after the other continuously first by pulling Trigger then by bumping Contact arm against workpiece with the Trigger being pulled.
*2: One screw is driven first by pushing Contact arm against workpiece, then by pulling Trigger with the Contact arm kept pushed; screw cannot be driven when the steps are reversed. Another one can be driven by releasing Trigger, then by repeating the steps; however, cannot be driven if Trigger is not released before repetition of the steps.
Standard equipment
Hook | 1 |
Safety goggles | 1 |
Oil supply (containing 30ml of turbine oil) | 1 |
Hex wrench 4 | 1 |
Driver bit | 1 |
Plastic carrying case | 1 |
Note: The standard equipment for the tool shown above may vary by country.
Optional accessories
Plastic sheet collated drywall screws (coil type)
[3.5mm shank diameter: 25, 28, 41mm; 3.8mm shank diameter: 25, 28, 32, 41mm] Air hose
Air leak repair set