P 2/20
Repair
CAUTION: Disconnect the air hose from the machine and then remove remaining screws for safety before repair/ maintenance in accordance with the instruction manual!
[1] NECESSARY REPAIRING TOOLS
Code No. | Description | Use for | |
|
|
| |
1R003 | Retaining ring S pliers | Removing Pipe 13 | |
1R027 | Bearing setting pipe | Assembling Rotor | |
1R045 | Gear extractor (large) | Disassembling Rotor | |
1R346 | Center attachment for 1R045 | ||
| |||
|
|
| |
1R229 | 1/4” Hex. shank bit for M5 | Screwing/unscrewing M5 Hex socket head bolt | |
|
|
| |
1R266 | Spring pin extractor 2 | Disassembling Adjuster complete and Adjuster shaft | |
|
|
| |
1R267 | Spring pin extractor 2.5 | Disassembling Trigger and Idler | |
|
| ||
1R268 | Spring pin extractor 3 | ||
| |||
|
|
| |
1R273 | Ring spring 26 setting tool B | Assembling Air Motor section | |
|
|
| |
1R291 | Retaining ring S & R pliers | Disassembling/assembling Retaining ring |
[2] LUBRICATIONS
Apply ISOFLEX NB52 to the portions designated with the white arrow, and apply lubricant VG32 to the portions designated with black arrow, to protect parts and product from unusual abrasion.
Item No. | Description | Portion to lubricate |
|
|
|
| Nail drive section | Cylinder, O rings, Driver bit set, etc. |
|
| |
| Air Motor (Apply lubricant “VG32” to the Drum portion of Air motor.) | |
|
| |
|
|
|
| Trigger valve section | O rings, Trigger valve case, Trigger stem, Pilot valve, etc. |
|
|
|
| Inlet section | Plug, Inlet cap, etc. |
|
|
|
| Nail feed piston section | Cup washer, O rings, etc. |
|
|
|
Fig. 1
Drive section
Air motor
Trigger valve section
Inlet section
Nail feed piston section