Milwaukee 6521 Series manual Maintenance, Accessories, Five Year Tool Limited Warranty

Page 9

MAINTENANCE

WARNING!

To reduce the risk of injury, always unplug your tool before performing any maintenance. Never disassemble the tool or try to do any rewiring on the tool's electrical system. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tools

Keep your tool in good repair by adopting a regular maintenance pro- gram. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mount- ing, broken parts and any other condition that may affect its safe opera- tion. If abnormal noise or vibration occurs, turn the tool off immediately and have the problem corrected before further use. Do not use a dam- aged tool. Tag damaged tools “DO NOT USE” until repaired (see “Repairs”).

Under normal conditions, relubrication is not necessary until the motor brushes need to be replaced. After six months to one year, depending on use, return your tool to the nearest MILWAUKEE service facility for the following:

WARNING!

To reduce the risk of injury, electric shock and damage to the tool, never immerse your tool in liquid or allow a liquid to flow inside the tool.

Cleaning

Clean dust and debris from vents. Keep the tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean your tool since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

Repairs

If your tool is damaged, return the entire tool to the nearest service center.

Lubrication

Brush inspection and replacement

Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.)

Electrical inspection (switch, cord, armature, etc.)

Testing to assure proper mechanical and electrical operation

ACCESSORIES

WARNING!

To reduce the risk of injury, always unplug the tool before attaching or removing accessories.

Use only specifically recommended accessories. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a catalog, contact your local distributor or a service center.

Quik-Lok®Cord Sets

10' Quik-Lok®Cord Cat. No. 48-76-5010

25' Quik-Lok®Cord Cat. No. 48-76-5025

Select Models:

Blade Clamp Cat. No. 42-68-0682

Blade Clamp Screw Cat. No. 06-83-2975

“787” Blades:

Blade Clamp Cat. No. 42-68-0685

Blade Clamp Screw Cat. No. 06-83-2975

See Pages 24, 25 & 26 for a listing of Super Sawzall® Blades.

FIVE YEAR TOOL LIMITED WARRANTY

Every MILWAUKEE tool is tested before leaving the factory and is war- ranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace (at MILWAUKEE’s discretion), without charge, any tool (including battery chargers) which examination proves to be defec- tive in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight pre- paid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.

Battery Packs, Flashlights, and Radios are warranted for one (1) year from the date of purchase.

THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN- TIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclu- sions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.

page 9

Image 9
Contents Operators Manual Page Electrical Safety Work Area Safety Power Tool USE and CarePersonal Safety ServiceFunctional Description Specific Safety Rules SawzallsCatalog Volts Length Strokes AC Only Stroke Per Minute 6521 120 3200 SeriesRecommended Minimum Wire Gauge For Extension Cords Guidelines for Using Extension CordsGrounding Extension CordsQuik-LokBlade Clamp Maintenance Tool AssemblySelecting a Blade Removing broken blades from the Quik-LokBlade ClampOperation Orbit Control Switch FigImpact Protection System Starting, Stopping and Controlling SpeedSelecting the Speed Range Trigger Speed Control SwitchGeneral Cutting Cutting MetalsMaintenance AccessoriesFive Year Tool Limited Warranty Sécurité Électrique Conserver CES Instructions Sécurité DU Lieu DE TravailSécurité Individuelle Utilisation ET Entretien DE L’OUTIL ÉlectriqueRègles DE Sécurité Spécifiques Sawzalls Description FonctionnelleMise À LA Terre Avertissement Calibres minimaux recommandés pour Les cordons de rallongeCordons DE Rallonge Trois dentsChoix d’une lame Montage DE Loutil AvertissementEntretien de la fixation de lame Quik-Lok Retrait d’une lame brisée de la fixation de lame Quik-LokCommande de mouvement orbital Fig Maniement AvertissementDémarrage, arrêt et contrôle de la vitesse Sélection du régime de vitesse Commande dInterrupteur à détenteCoupe, en général Coupe des métauxMaintenance Avertissement Accessoires AvertissementGarantie Limitée DE L’OUTIL DE Cinq ANS Seguridad Eléctrica GUA0RDE Estas Instrucciones Seguridad EN EL Área DE TrabajoSeguridad Personal USO Y Cuidado DE LAS Herramientas EléctricasDescripciónfuncional Reglas Especificas DE Seguridad SawzallsCat Volts Largo de Carreras Ca ~ Carrera Por Minuto Serie 120 32 mm 1-1/4 6521Tierra ¡ADVERTENCIA Extensiónes EléctricasGuías para el uso de cables de extensión Seleccionando las seguetas Ensambaje DE LA Herramienta ¡ADVERTENCIAMantenimiento de la abrazadera de la segueta Quik-Lok Modelos de la abrazadera de la sequeta Quik-LokFigMecanismo de protección durante un impacto Operacion ¡ADVERTENCIAIniciando, frenando y controlando la velocidad Interruptor de control de órbita FigInterruptor Selección del rango de velocidadCortes en general Cortes en metalMantenimiento ¡ADVERTENCIA Accesorios ¡ADVERTENCIAGarantía Limitada DE Cinco Años Plaster Cutting Blade Lame Pour Tailler Et Découper Dans Le Métal Ax Baldes Ax Baldes Hojas Ax Notas Sawdust