Troubleshooting, Service and Repairs

90550119 PC1800JS Jig Saw 4/9/09 7:52 AM Page 13

TROUBLESHOOTING

Problem	Possible Cause	Possible Solution
• Unit will not start.	• Battery pack not installed properly.	• Check battery pack
		installation.
	• Battery pack not charged.	• Check battery pack
		charging requirements.

•Battery pack will not charge. • Battery pack not inserted into charger.

•Charger not plugged in.

•Insert battery pack into charger until LED appears.

•Plug charger into a working outlet. Refer to “Important Charging Notes” for more details.

	• Surrounding air temperature	• Move charger and battery
	too hot or too cold.	pack to a surrounding air
		temperature of above 40
		degrees F (4,5°C) or below
		105 degrees F (+40,5°C).

SPECIALNOTES FOR USE WITH LITHIUM BATTERIES
• Unit shuts off abruptly.	• Battery pack has reached its	•Allow battery pack to cool
	maximum thermal limit.	down.
	• Out of charge. ( To	• Place on charger and
	maximize the life of the	allow to charge.
	batterypackitisdesigned
	to shutoff abruptly when
	the charge is depleted.)

For assistance with your product, visit our website at www.portercable.com for a list of service centers, or call the PORTER-CABLE Customer Care Center at (888) 848-5175.

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information about PORTER-CABLE, its factory service centers or authorized warranty service centers, visit our website at www.portercable.com or call our Customer Care Center at (888) 848-5175. All repairs made by our service centers are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by others.

You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson, Tennessee 38305, (888) 848-5175 - Attention: Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number, etc.).

ACCESSORIES

: Since accessories, other than those offered by PORTER-CABLE, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only PORTER-CABLE recommended accessories should be used with this product.

A complete line of accessories is available from your PORTER-CABLE Factory Service Center or a PORTER-CABLE Authorized Warranty Service Center. Please visit our Web Site www.portercable.com for a catalog or for the name of your nearest supplier.

THREE YEAR LIMITED WARRANTY

PORTER-CABLE will repair or replace, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase for tools (two years for batteries). This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.portercable.com or call (888) 848-5175. This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, PORTER-CABLE tools are covered by our:

PC1800JS, 90550119 specifications

The Porter-Cable 90550119 PC1800JS is an exceptional jig saw that stands out in the power tool market. Known for its user-friendly design and robust performance, this tool is ideal for both professional craftsmen and DIY enthusiasts. It delivers a combination of precision, power, and versatility that makes it indispensable for a variety of cutting tasks.

One of the main features of the PC1800JS is its powerful 6.5-amp motor, which provides ample power for tackling tough materials. This motor is designed to maintain consistent speed under heavy load, ensuring smooth cuts every time. The jig saw operates with a variable speed control feature that allows users to adjust the speed from 0 to 3,000 strokes per minute. This versatility makes it suitable for a wide range of materials, including wood, metal, and plastic.

The jig saw is equipped with an orbital action feature that offers four settings, allowing users to customize the cutting action based on their specific needs. This feature enhances cutting efficiency and provides smoother finishes on different materials. The adjustable shoe of the PC1800JS enables users to make bevel cuts up to 45 degrees, making it a valuable tool for projects requiring angled cuts.

In terms of design, the PC1800JS is ergonomically shaped for maximum comfort during extended use. The rubber over-mold handle provides a secure grip, reducing user fatigue for prolonged operations. The tool also includes an integrated dust blower that keeps the cutting line clear of debris, improving visibility and accuracy during cuts.

Another standout characteristic of the Porter-Cable PC1800JS is its tool-less blade change system. This feature allows for quick and easy blade changes, enabling users to switch between various blade types without the need for additional tools. The jig saw is compatible with both T-shank and U-shank blades, providing users with ample options to tackle different projects.

In summary, the Porter-Cable 90550119 PC1800JS jig saw combines powerful performance with innovative features and ease of use. With its adjustable speed settings, orbital action, and comfortable design, it is well-equipped to handle a variety of cutting tasks, making it a valuable addition to any toolkit. Whether for professional use or home improvement projects, the PC1800JS stands as a reliable choice for achieving precise and clean cuts every time.