FEATURES
PRODUCT SPECIFICATIONS
Length of Stroke | 1 in. |
Strokes Per Minute |
Cutting Angle | 0° to 45° (Left and Right) |
Orbital Motion | 4 Settings |
ASSEMBLY
WARNING:
WARNING:
Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury.
Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
If any parts are damaged or missing, please call
OPERATION
WARNING:
Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to comply with ANSI Z87.1.Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
Cutting wood surfaces, thin sheet metal, plastics, and laminates
SWITCH TRIGGER/LOCK-ON BUTTON
See Figure 1, page 9.
The
To turn the saw on: Depress the switch trigger.
To turn the saw off: Release the switch trigger.
To lock on: Depress the switch trigger. Push in and hold the
To release: Depress the switch trigger.
INSTALLING/REMOVING BATTERY PACK
See Figure 2, page 9.
To install:
Place the battery pack on the tool.
Make sure the latches on each side of the battery pack snap into place and the battery pack is secured on the tool before beginning operation.
To remove:
Depress the latches on the sides of the battery pack.
Remove the battery pack.
WARNING:
Battery products are always in operating condition. Removing battery pack will prevent accidental starting that could cause serious personal injury.
5 - English