Safety Rules for Cordless Impact Drivers

BM 2610958960 06-08 6/10/08 1:47 PM Page 4

Safety Rules for Cordless Impact Drivers

Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not drill, fasten or break into existing walls or other blind areas where electrical wiring may exist. If this situation is unavoidable, disconnect all fuses or circuit breakers feeding this worksite.

Always wear safety goggles or eye protection when using this tool.

Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.

Use thick cushioned gloves and limit the exposure time by taking frequent rest periods. Vibration caused by hammer-drill action may be harmful to your hands and arms.

Secure the material being fastened. Never hold it in your hand or across your legs. Unstable support can cause loss of control and injury.

Avoid accidental starting. Be sure the forward/reverse switch is in the off position before inserting battery pack. Carrying appliances with your finger on the switch or inserting the battery pack into an appliance with the switch on invites accidents.

Remove battery pack before changing accessories. Accidental starting may occur because battery appliances with a battery inserted are in the operative condition.

Be prepared for a reaction torque when “seating” or removing a fastener. The screwdriver housing may tend to twist in the opposite direction of bit rotation when

“seating” or removing a fastener depending on the torque setting of the tool.

Do not use dull or damaged bits and accessories. When installing an accessory, insert the shank of the bit well within the chuck. Be sure the chuck has locked onto the bit correctly.

Do not run the tool while carrying it at your side. A spinning bit could become entangled with clothing and injury may result.

Place the tool onto the fastener only when the screwdriver is switched off. Rotating driver tools can slide off the fastener.

Do not use this tool as a drill. Tools equipped with shut-off clutches are not designed for drilling applications. The clutch can shut off automatically and without warning.

Be careful when driving long screws – there is a risk of sliding off the fastener head depending on type of socket or bit used. First test the run-down of a fastener and pay attention during the screw driving process to ensure you do not injure yourself if the tool bit or socket slides off of the fastener.

!WARNING Some dust created by power sanding, sawing,

grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of

these chemicals are:

•Lead from lead-based paints

•Crystalline silica from bricks, cement and other masonry products.

•Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment such as dust masks designed to filter out microscopic particles.

-4-

PS40-2, PS40-2A, PS40B specifications

The Bosch Power Tools PS40B, PS40-2A, and PS40-2 are versatile cordless impact drivers designed to provide exceptional performance and convenience for both professionals and DIY enthusiasts. Renowned for their quality and durability, these tools boast features that make any fastening job easier and more efficient.

One of the standout features of the PS40 series is its compact and lightweight design, allowing users to operate in tight spaces without sacrificing power. With a mere weight of approximately 2.3 pounds, these impact drivers are easy to handle over extended periods, resulting in reduced user fatigue. Furthermore, the tools are equipped with a 1/4-inch hex chuck that enables quick and simple bit changes without needing additional tools, enhancing productivity during tasks.

The PS40B and PS40-2A models are powered by a robust 12-volt lithium-ion battery, offering a good balance between power and battery life. The battery technology features Bosch’s innovative Electronic Cell Protection, which helps to prolong the lifespan of the battery by preventing overheating and overcharging. This feature is complemented by a built-in battery gauge that provides users with real-time information on the charge status, allowing them to plan their work without unexpected interruptions.

Additionally, these impact drivers incorporate a powerful motor with a maximum torque output of up to 1,200 inch-pounds, making them more than capable of tackling stubborn screws and fasteners across various materials. The integrated two-speed transmission allows users to select between high-speed for rapid fastening and low-speed for more controlled driving, providing versatility for different applications.

Another advantage of the Bosch Power Tools PS40 series is their added safety features. The tools include an advanced built-in LED light that illuminates the work area, ensuring visibility even in dimly lit environments. This feature greatly improves accuracy and safety while working on complex projects.

In conclusion, the Bosch Power Tools PS40B, PS40-2A, and PS40-2 are exemplary impact drivers that combine performance, convenience, and innovative technology, making them an essential addition to any toolbox. With their lightweight design, powerful motor, long-lasting battery, and user-friendly features, these tools stand out as reliable choices for tackling a variety of fastening tasks efficiently. Whether you are a professional contractor or a weekend warrior, the PS40 series will meet—and often exceed—your expectations.