Black & Decker BD18PS, BD14PS Troubleshooting, Rbrc Seal, Maintenance, Accessories

Page 10

90536242 BD12PSK BD14PSK BD18PSK 5/8/08 8:22 AM Page 10

Hold the drill firmly with two hands to control its twisting action.

DO NOT CLICK THE TRIGGER OF A STALLED DRILL OFF AND ON IN AN ATTEMPT TO START IT. DAMAGE TO THE DRILL CAN RESULT.

Minimize stalling on breakthrough by reducing pressure and slowly drilling through the last part of the hole.

Keep the motor running while pulling the bit out of a drilled hole. This will help reduce jamming.

Make sure switch turns drill on and off.

MAINTENANCE

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

TROUBLESHOOTING

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Battery pack not installed properly.

• Check battery pack

 

 

installation.

 

• Battery pack not charged.

• Check battery pack charging

 

 

requirements.

Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into charger until red LED

 

appears.

• Charger not plugged in.

• Plug charger into a working

 

outlet. Refer to “Important

 

Charging Notes” for more

 

details.

• Surrounding air temperature

• Move charger and battery

too hot or too cold.

pack to a surrounding air

 

temperature of above 40

 

degrees F (4,5°C) or below

 

105 degrees F (+40,5°C).

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:

1-800-544-6986.

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-cadmium battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already

been paid by Black & Decker. In some areas, it is illegal to place spent nickel-cadmium batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative.

RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent nickel- cadmium batteries. Help protect our environment and conserve natural resources by returning the spent nickel-cadmium battery to an authorized Black & Decker service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.

10

Image 10
Contents Cordless Drills with Smart Select Technology VEA EL Español EN LA ContraportadaGeneral Power Tool Safety Warnings Specific Safety Rules Safety Guidelines Definitions SymbolsFunctional Description Battery CAP Information Figure a Safety Warnings and Instructions Charging the Battery packNameplate Rating Amps 0 Instructions for CUP Chargers Charging the Power PackInstructions for Jack Plug Chargers Important Charging NotesTrigger Switch & Reversing Button Figure D Safety Warnings and Instructions DrillsTorque Control Smart Select Technology Figure E On Board BIT Storage Keyless Chuck Figure FScrew Driving DrillingAccessories TroubleshootingMaintenance Rbrc SealService Information Full Two-Year Home Use Warranty Mode D’EMPLOI 90536242 BD12PSK BD14PSK BD18PSK 5/8/08 822 AM 90536242 BD12PSK BD14PSK BD18PSK 5/8/08 822 AM Règles DE Sécurité Spécifiques Toujours Porter UN Équipement DE Protection HomologuéDescription Fonctionnelle SymbolesLignes Directrices EN Matière DE Sécurité Définitions Information Concernant LE Capuchon DU BLOC-PILE Figure aChargement DU BLOC-PILES Directives Pour LES Chargeurs Cuvettes Directives Pour LES Chargeurs À FicheAvertissements DE Sécurité ET Directives Perceuses Détente ET Bouton Inverseur Figure D Correcteur DE Couple Technologie Smart Select Figure EMandrin Sans CLÉ Figure F PerçageEntretien VissageInformation sur les réparations AccessoiresDépannage 90536242 BD12PSK BD14PSK BD18PSK 5/8/08 822 AM 555326-7100 90536242 BD12PSK BD14PSK BD18PSK 5/8/08 822 AM 90536242 BD12PSK BD14PSK BD18PSK 5/8/08 822 AM Normas DE Seguridad Específicas Pautas DE SEGURIDAD/DEFINICIONESSímbolos Información acerca del protector de la batería Figura aAdvertencias e instrucciones de seguridad Cómo cargar Descripción DE LAS FuncionesInstrucciones Para LOS Cargadores Para Enchufes Hembra Carga DEL Paquete DE AlimentaciónInstrucciones Para Cargadores DE Base Instrucciones Y Advertencias DE Seguridad Taladros Notas Importantes Sobre LA CargaInterruptor Disparador Y Botón DE Inversión Figura D Control DE Torsión Tecnología Smart Select Figura E Portabrocas SIN Llave Figura FTaladrado DestornilladoEspacio EN LA Herramienta Para Guardar Brocas MantenimientoDetección DE Problemas Problema Causa posible Solución posibleMERIDA, YUC CULIACAN, SINMEXICO, D.F MONTERREY, N.L90536242 BD12PSK BD14PSK BD18PSK 5/8/08 822 AM 90536242 BD12PSK BD14PSK BD18PSK 5/8/08 822 AM 90536242 BD12PSK BD14PSK BD18PSK 5/8/08 822 AM