Sega 4200-6367 owner manual Assembling Check

4

ASSEMBLING CHECK

The TEST MENU allows for each part of the cabinet to be checked, the Monitor to be adjusted, and the coin and

game related various functions to be performed.

	CPU ROM TEST
GOOD	(CROM03 MASK)	IC.1	*****
GOOD	(CROM02 MASK)	IC.2	*****
GOOD	(CROM01 MASK)	IC.3	*****
GOOD	(CROM00 MASK)	IC.4	*****
GOOD	(CROM13 MASK)	IC.5	*****
GOOD	(CROM12 MASK)	IC.6	*****
GOOD	(CROM11 MASK)	IC.7	*****
GOOD	(CROM10 MASK)	IC.8	*****
GOOD	(CROM33 EPROM)	IC.9	*****
GOOD	(CROM32 EPROM)	IC.10	*****
GOOD	(CROM31 EPROM)	IC.11	*****
GOOD	(CROM30 EPROM)	IC.12	*****
GOOD	(CROM3 EPROM)	IC.13	*****
GOOD	(CROM2 EPROM)	IC.14	*****
GOOD	(CROM1 EPROM)	IC.15	*****
GOOD	(CROM0 EPROM)	IC.16	*****

PRESS TEST BUTTON TO EXIT

	INPUT TEST
HANDLEBAR	OFF
THROTTLE	OFF
FRONT BRAKE	OFF
REAR BRAKE	OFF
VIEW CHANGE	OFF
MUSIC SELECT	OFF
SHIFT UP	OFF
SHIFT DOWN	OFF
START	OFF
COIN #1	OFF
SERVICE-SW	OFF
TEST-SW	OFF

Selecting the MEMORY TEST on the test mode menu screen causes the on-board memory to be tested automatically. The game board is satisfactory if the display beside each IC No. shows GOOD.

Selecting the INPUT TEST on the menu screen in the test mode to display the screen on which each SW and Volume is tested. Press each switch. (To check the Coin SW, insert a Coin from the inlet with the Coin Chute Door being opened.) If the display beside each switch is ON, the switch and wiring connection are satisfactory. Check the display of each Volume value. The Volume could have an irregularity caused by differences between machines and vibration during transporta- tion. Set the Volume values by referring to Section ?

PRESS TEST BUTTON TO EXIT

OUTPUT TEST

START	LAMP	OFF
VIEW CHANGE	LAMP	OFF
MUSIC SELECT	LAMP	OFF
RACE READER	LAMP	OFF

>EXIT

SELECT WITH SERVICE BUTTON

PRESS TEST BUTTON TO EXIT

In the output test mode, carry out lamp test to ascertain that each lamp lights up satisfactorily.

13