Sega 4200-6367 owner manual Communication Play, 16 1 Installation Precautions

16. COMMUNICATION PLAY

Before performing between-cabinets connection work, be sure to turn the Power SW OFF and unplug the power plug from the wall socket. Failure to observe this can cause electric shock and/or short circuit accidents.

Perform assembling as shown in this manual. Erroneous assembling can cause electric shock accidents and malfunctioning.

By linking 4 machines, up to 4 persons can play simultaneously. Although accessory parts are to be installed for communication play, some of the parts will remain as spares.

16 - 1 INSTALLATION PRECAUTIONS

1Simplemultiple machines are to be linked, sufficient power corresponding to the number of machines used need to be supplied. As standard, amperage is 7A (AC100~110~120V area).

2Due to the parts used for communication play, interval between machines is 20 cm. If parts are not installed, adjascent players will come nto contact with each other and this can cause accidents and trouble.

16 - 2 CONNECTING THE COMMUNICATION CABLES

The Communication Cable is optic-fiber made and will break if excessively bent.

Handle with care.

Connect machines with the protective tube and pass the communication cable in the tube. Depending on the number of machine units to be linked, connect the communication cables (optic-fiber cables) in a manner shown in the following figures.

55