Panasonic AW-RP120G operating instructions Focus, zoom and iris section

Page 14

Parts and their functions (continued)

Focus, zoom and iris section

 

 

 

>FOCUS dial [FOCUS]

Use this to manually control the focus.

During auto focusing (when the auto focus button [] indicator is on), operation is disabled.

Turned clockwise : The focus moves to the far end.

Turned counterclockwise: The focus moves to the near end.

zzSetting “REVERSE” in FOCUS DIRECTION menu [29] changes the direction the focus moves in relation to the direction that the FOCUS dial is turned.

?Auto focus button [AUTO]

Use this to set focus control to [Auto (auto focus)].

During auto focusing, operation of the FOCUS dial () and one- touch auto focus button () is disabled.

Button indicator on : Auto focus

Button indicator off : Manual focus

zzWhen a lens equipped with an extender function is used for the remote camera, each press of this button switches the extender function on or off.

Button indicator on : The extender function is enabled.

Button indicator off : The extender function is disabled.

(For details on how to connect the lens control cables to the pan-tilt head, refer to the operating instructions of the pan-tilt head.)

zzButton operation is disabled if the remote camera has no auto focus function and lens extender function.

One-touch auto focus button [OTAF]

When this button is pressed during manual focusing (when the auto focus button [] indicator is off), the button indicator turns on for a brief moment and the auto focusing operation is performed to bring the subject into focus.

zzButton operation is disabled if the remote camera has no auto focus function.

AFOCUS SPEED dial [SPEED]

Use this to adjust the operation variation amount for FOCUS dial () operation.

Turned clockwise

:

Operation is at a higher speed (HI)

Turned counterclockwise:

Operation is at a lower speed (LOW)

BZOOM button [ZOOM]

Use this to adjust the lens zoom.

The zooming speed changes depending on the extent to which the button is pressed.

When the TELE side is pressed : Telephoto setting

When the WIDE side is pressed : Wide-angle setting

zzWhen the function for linking with a switcher is enabled, you can press the ZOOM button to control switcher parameters.

⇒“Setting linking with a switcher” in Operations and Settings (page 31)

zzSetting [REVERSE] in ZOOM DIRECTION menu [28] changes the direction the lens zoom moves in relation to the direction that the ZOOM button is moved.

XZOOM SPEED dial [SPEED]

Use this to adjust the operation variation amount for ZOOM button () operation.

Turned clockwise

:

Operation is at a higher speed (HI)

Turned counterclockwise:

Operation is at a lower speed (LOW)

IRIS dial [IRIS]

During manual iris (when the auto iris button [] indicator is off), use this to manually control the lens iris.

During auto iris (when the auto iris button () indicator is on), use this to adjust the convergence level of the auto iris of the remote camera.

Turned clockwise

:

The lens iris opens.

Turned counterclockwise:

The lens iris closes.

EAuto iris button [AUTO]

Use this to set lens iris control to [Auto (auto iris)].

Button indicator on

:

Auto iris

Button indicator off

:

Manual iris

zzWhen AW-HE50 or AW-HE60 is being controlled, Contrast Mode switches to “Auto” or “Manual” in conjunction with the selection of auto iris or manual iris. Also, if you set the shooting mode to “FullAuto”, the lens iris is fixed to auto iris and button operation is disabled.

FOCUS/ZOOM/IRIS ENABLE button [ENABLE]

Use this to enable or disable operation of the FOCUS dial (), ZOOM button () and IRIS dial ().

Button indicator on or blinking:

Operation of the FOCUS dial, ZOOM button and IRIS dial is enabled.

Button indicator off : Operation of the FOCUS dial, ZOOM button and IRIS dial is disabled.

zzThe FOCUS/ZOOM/IRIS button indicator is on while the ZOOM button is being used to control the lens zoom.

zzThe FOCUS/ZOOM/IRIS ENABLE button indicator is blinking while the ZOOM button is being used to control the switcher parameters.

zzWhen the [7. P/T/Z CONTROL] item in SW FUNCTION menu

[42]is set to [Button Select], pressing the FOCUS/ZOOM/IRIS ENABLE button switches the control application of the ZOOM button.

⇒ “Setting linking with a switcher” in Operations and Settings (page 31)

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Instructions It can be downloaded from the home page of Adobe Systems Pp Come aprire i file dei manuali di istruzioni per l’usoRead this first FCC NoteImportant Safety Instructions EMC Notice for the PURCHASER/USER of the Apparatus Performance levelContents Restrictions on use User authenticationIntroduction Supported remote cameras FeaturesSupported switcher Accessories Precautions for useExample of embedding the unit in a desktop Precautions for installationMake mount angles suitable for the installation location Unit mm inch AppearanceZzMount angle attachment position Menu operation section Parts and their functionsControl panel Camera selection section Pan and tilt sectionFocus, zoom and iris section Color adjustment section Menu and memory selection section Indicator section ZzMemory cards User button sectionMemory card section About the external DC power supply Rear panelBasic operations of the unit Off Basic operations for the menusShutter SpeedConnections Examples of IP connectionsConnections Examples of serial connections „„Serial connections for AW‑HE120 remote cameras„„Serial connection for a remote camera AW‑HE50 or AW‑HE60 ZzSwitch settings of AW-IF400 Supported camera„„Serial connections for AW-PH650 and camera ZzUse a straight cable category 5 or above for the LAN cableSetting the IP address of the unit Network settings of the unitSetting the subnet mask Setting the default gatewayPort CAM1 Setting the reception port numberSetting Global Area Displaying the MAC addressOverview of related menus and operations Link settingsConnection destination IP addresses CAM1 NoAsign Setting the IP addresses automatically auto IP settingWhen configuring the settings for the first time SW CTLAuto SET Complete Auto SET SET UP ERRAuto SET Auto SET Renew IP ADRCAM2 Network CAM3 Network CAM4 NoAsign C001/004 S0/1Remote camera D 192.168.000.200 Turn the F2 dial to select Yes, and then press the F2 dialConnection destination IP address of CAM4 Retry Auto SET Keep IP ADROVER! YES CAM1 IP Duplicate Swapping connection destination IP addressesCAM1 192.168.000.003 Press the F2 dial to confirm the IP addressSW IP Address Setting the connection destination port numberCAM1 192.168.000.008Selecting a camera group Selecting a camera groupSelecting a remote camera Troubleshooting „„General Specifications„„Input/output connectors Index Memo Memo For business users in the European Union

AW-RP120G specifications

The Panasonic AW-RP120G is a sophisticated remote camera controller designed for broadcasting and production environments that require precise control over multiple pan-tilt-zoom (PTZ) cameras. This versatile controller offers an extensive range of features, making it a reliable choice for professionals in the field.

One of the key highlights of the AW-RP120G is its user-friendly interface. It incorporates a large, LCD touchscreen display that provides real-time information and control options for both novice and experienced operators. The layout is intuitive, enabling quick access to various settings without the need for complex configurations. This allows operators to focus on their production rather than getting mired in technical details.

The AW-RP120G is equipped with the capability to control up to 200 PTZ cameras simultaneously, which caters to large-scale productions. This flexibility is crucial in various settings, from live events to studio broadcasts, where multiple camera angles and shots are necessary. The controller utilizes IP connectivity and supports the Panasonic’s proprietary protocol, ensuring seamless operation across a networked environment.

Another standout characteristic of the AW-RP120G is its advanced preset management system. Users can store and recall up to 100 preset camera positions, eliminating the need to manually adjust each PTZ camera during a live performance. This feature significantly enhances workflow efficiency and allows for smooth transitions between camera angles.

The device further incorporates advanced technologies, such as PoE (Power over Ethernet) compatibility, which simplifies installation by allowing power and data to be transmitted over a single cable. This reduces clutter and streamlines setup processes, particularly in complex environments.

In terms of design, the AW-RP120G is compact and portable, making it easy to integrate into various production setups. It is built with durability in mind, ensuring that it can withstand the rigors of frequent use in demanding environments.

Overall, the Panasonic AW-RP120G is a state-of-the-art remote controller that combines functionality, efficiency, and reliability. With its advanced features, it is an essential tool for any professional looking to elevate their camera operation capabilities in broadcasting and live event production. This makes it a valuable investment for those looking to enhance their production quality while streamlining their workflow.
Top Page Image Contents