![](/images/new-backgrounds/1141093/14109377x1.webp)
Troubleshooting
Symptom | Cause and Measure | Reference Page | |
|
|
| |
| zzIs external DC power being supplied? | – | |
Cannot turn the power of the |
|
| |
|
| ||
unit on. | zzIs the DC plug of the external DC power supply connected to the unit | – | |
| properly? | ||
|
| ||
|
|
| |
| zzIs a power supply connected to the remote camera properly? | – | |
|
|
| |
| zzAre the remote camera and unit connected properly? | <Basics> | |
| P. 21 to P. 26 | ||
|
| ||
|
|
| |
| zzAre the connection settings correct? | <Basics> | |
| P. 29 to P. 36 | ||
|
| ||
Cannot operate a remote |
|
| |
zzIs the remote camera in the standby state? | <Operations and | ||
camera | Settings> | ||
| Turn on the power of the remote camera. | P. 4 | |
|
| ||
|
|
| |
| zzIs the remote camera selected properly? | <Basics> | |
| P. 37 to P. 38 | ||
|
| ||
|
|
| |
| zzIs the ENABLE button indicator on? | <Operations and | |
| Settings> | ||
|
| P. 27 | |
|
|
| |
| zzIs the installation method setting configured for the remote camera? |
| |
| The setting needs to be configured in accordance with the actual installation | – | |
The remote camera moves | state (mounted right side up or upside down). | ||
| |||
in the opposite direction to | Refer to the operating instructions for the remote camera. |
| |
the operation of the PAN/TILT |
|
| |
|
| ||
lever. | zzIs the movement direction set properly on the unit? | <Operations and | |
| Settings> | ||
|
| P. 23 | |
|
|
| |
The remote camera moves |
| <Operations and | |
in the opposite direction | zzIs the movement direction set properly on the unit? | ||
Settings> | |||
to operation of the ZOOM | |||
| P. 23 | ||
button and FOCUS dial. |
| ||
|
| ||
|
|
| |
| zzAre the connection settings correct? | <Basics> | |
| P. 29 to P. 36 | ||
|
| ||
The switcher IP link function |
|
| |
|
| ||
does not work. | zzAre the settings for linking with the switcher correct? | <Operations and | |
| Settings> | ||
|
| P. 31 | |
|
|
|
39