Panasonic AW-RP120G EMC Notice for the PURCHASER/USER of the Apparatus, Performance level

Page 5

Read this first! (continued)

EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS

1.Applicable standards and operating environment (AW-RP120G) The apparatus is compliant with:

standards EN55103-1 and EN55103-2, and

electromagnetic environments E1, E2, E3, E4 and E5.

2.Pre-requisite conditions to achieving compliance with the above standards

<1> Peripheral equipment to be connected to the apparatus and special connecting cables

The purchaser/user is urged to use only equipment which has been recommended by us as peripheral equipment to be connected to the apparatus.

The purchaser/user is urged to use only the connecting cables described below.

<2> For the connecting cables, use shielded cables which suit the intended purpose of the apparatus.

Video signal connecting cables

Use double shielded coaxial cables, which are designed for 75-ohm type high-frequency applications, for SDI (Serial Digital Interface).

Coaxial cables, which are designed for 75-ohm type high-frequency applications, are recommended for analog video signals.

Audio signal connecting cables

If your apparatus supports AES/EBU serial digital audio signals, use cables designed for AES/EBU.

Use shielded cables, which provide quality performance for high-frequency transmission applications, for analog audio signals.

Other connecting cables (LAN, RS-422)

Use double shielded cables, which provide quality performance for high-frequency applications, as connecting cables.

When connecting to the DVI signal terminal, use a cable with a ferrite core.

If your apparatus is supplied with ferrite core(s), they must be attached on cable(s) following instructions in this manual.

3.Performance level

The performance level of the apparatus is equivalent to or better than the performance level required by these standards. However, the apparatus may be adversely affected by interference if it is being used in an EMC environment, such as an area where strong electromagnetic fields are generated (by the presence of signal transmission towers, cellular phones, etc.). In order to minimize the adverse effects of the interference on the apparatus in cases like this, it is recommended that the following steps be taken with the apparatus being affected and with its operating environment:

1. Place the apparatus at a distance from the source of the interference.

2. Change the direction of the apparatus.

3. Change the connection method used for the apparatus.

4. Connect the apparatus to another power outlet where the power is not shared by any other appliances.

Декларація про Відповідність

Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в

електричному та електронному обладнанні

(затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР, :

1.свинець(Pb) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на мільйон;

2.кадмій (Cd)– не перевищує 0,01 % ваги речовини або в концентрації до 100 частин на мільйон;

3.ртуть(Hg) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на мільйон;

4.шестивалентний хром (Cr6+ ) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на мільйон;

5.полібромбіфеноли (PBB) – не перевищує 0,1% ваги речовини або в концентрації до 1000 частин на мільйон;

6.полібромдефенілові ефіри (PBDE) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на мільйон.

Importer’s name and address of pursuant to EU rules:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

5

Image 5
Contents Operating Instructions Pp Come aprire i file dei manuali di istruzioni per l’uso It can be downloaded from the home page of Adobe SystemsFCC Note Read this firstImportant Safety Instructions Performance level EMC Notice for the PURCHASER/USER of the ApparatusContents Restrictions on use User authenticationIntroduction Supported remote cameras FeaturesSupported switcher Precautions for use AccessoriesExample of embedding the unit in a desktop Precautions for installationMake mount angles suitable for the installation location Unit mm inch AppearanceZzMount angle attachment position Menu operation section Parts and their functionsControl panel Pan and tilt section Camera selection sectionFocus, zoom and iris section Color adjustment section Menu and memory selection section Indicator section ZzMemory cards User button sectionMemory card section Rear panel About the external DC power supplyBasic operations of the unit Shutter Basic operations for the menusOff SpeedExamples of IP connections ConnectionsConnections „„Serial connections for AW‑HE120 remote cameras Examples of serial connections„„Serial connection for a remote camera AW‑HE50 or AW‑HE60 Supported camera ZzSwitch settings of AW-IF400ZzUse a straight cable category 5 or above for the LAN cable „„Serial connections for AW-PH650 and cameraSetting the subnet mask Network settings of the unitSetting the IP address of the unit Setting the default gatewaySetting Global Area Setting the reception port numberPort CAM1 Displaying the MAC addressOverview of related menus and operations Link settingsConnection destination IP addresses When configuring the settings for the first time Setting the IP addresses automatically auto IP settingCAM1 NoAsign SW CTLAuto SET Auto SET SET UP ERRAuto SET Complete Auto SET Renew IP ADRCAM2 Network CAM3 Network CAM4 NoAsign C001/004 S0/1Remote camera D 192.168.000.200 Turn the F2 dial to select Yes, and then press the F2 dialConnection destination IP address of CAM4 Retry Auto SET Keep IP ADROVER! YES CAM1 192.168.000.003 Swapping connection destination IP addressesCAM1 IP Duplicate Press the F2 dial to confirm the IP addressCAM1 Setting the connection destination port numberSW IP Address 192.168.000.008Selecting a camera group Selecting a camera groupSelecting a remote camera Troubleshooting „„General Specifications„„Input/output connectors Index Memo Memo For business users in the European Union

AW-RP120G specifications

The Panasonic AW-RP120G is a sophisticated remote camera controller designed for broadcasting and production environments that require precise control over multiple pan-tilt-zoom (PTZ) cameras. This versatile controller offers an extensive range of features, making it a reliable choice for professionals in the field.

One of the key highlights of the AW-RP120G is its user-friendly interface. It incorporates a large, LCD touchscreen display that provides real-time information and control options for both novice and experienced operators. The layout is intuitive, enabling quick access to various settings without the need for complex configurations. This allows operators to focus on their production rather than getting mired in technical details.

The AW-RP120G is equipped with the capability to control up to 200 PTZ cameras simultaneously, which caters to large-scale productions. This flexibility is crucial in various settings, from live events to studio broadcasts, where multiple camera angles and shots are necessary. The controller utilizes IP connectivity and supports the Panasonic’s proprietary protocol, ensuring seamless operation across a networked environment.

Another standout characteristic of the AW-RP120G is its advanced preset management system. Users can store and recall up to 100 preset camera positions, eliminating the need to manually adjust each PTZ camera during a live performance. This feature significantly enhances workflow efficiency and allows for smooth transitions between camera angles.

The device further incorporates advanced technologies, such as PoE (Power over Ethernet) compatibility, which simplifies installation by allowing power and data to be transmitted over a single cable. This reduces clutter and streamlines setup processes, particularly in complex environments.

In terms of design, the AW-RP120G is compact and portable, making it easy to integrate into various production setups. It is built with durability in mind, ensuring that it can withstand the rigors of frequent use in demanding environments.

Overall, the Panasonic AW-RP120G is a state-of-the-art remote controller that combines functionality, efficiency, and reliability. With its advanced features, it is an essential tool for any professional looking to elevate their camera operation capabilities in broadcasting and live event production. This makes it a valuable investment for those looking to enhance their production quality while streamlining their workflow.