Panasonic AW-RP120G operating instructions Read this first, FCC Note

Page 3

Read this first!

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING:

 

CAUTION:

 

 

• To reduce the risk of fire, do not expose this

 

Do not remove panel covers by unscrewing.

 

 

 

equipment to rain or moisture.

 

To reduce the risk of electric shock, do not remove the

 

 

• To reduce the risk of fire, keep this equipment away

 

covers. No user serviceable parts inside.

 

 

 

from all liquids.

 

Refer servicing to qualified service personnel.

 

 

 

Use and store only in locations which are not

 

 

 

 

 

 

 

 

 

exposed to the risk of dripping or splashing liquids,

 

CAUTION:

 

 

 

and do not place any liquid containers on top of the

 

 

 

 

equipment.

 

To reduce the risk of fire or electric shock and

 

 

 

 

 

annoying interference, use the recommended

 

 

 

 

 

 

 

 

accessories only.

 

 

WARNING:

 

 

 

 

 

 

 

 

 

Always keep memory cards or accessories out of the

 

CAUTION:

 

 

reach of babies and small children.

 

 

 

 

 

 

In order to maintain adequate ventilation, do not install

 

 

 

 

 

 

 

 

or place this unit in a bookcase, built-in cabinet or any

 

 

WARNING:

 

 

other confined space. To prevent risk of electric shock

 

 

Installation should only be performed by qualified

 

or fire hazard due to overheating, ensure that curtains

 

 

installation personnel. Improper installation may result

 

and any other materials do not obstruct the ventilation.

 

 

in the entire apparatus falling down and causing injury.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicates safety information.

 

 

 

 

 

 

 

 

 

 

 

 

 

FCC NOTICE (USA)

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Note:

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Warning:

To assure continued FCC emission limit compliance, the user must use only shielded interface cables when connecting to external units. If DVI-D port is to be used it must be connected to PC by compatible interface cable with two ferrite cores. Also, any unauthorized changes or modifications to this equipment could void the user’s authority to operate it.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

indicates safety information.

3

Image 3
Contents Operating Instructions Pp Come aprire i file dei manuali di istruzioni per l’uso It can be downloaded from the home page of Adobe SystemsFCC Note Read this firstImportant Safety Instructions Performance level EMC Notice for the PURCHASER/USER of the ApparatusContents User authentication IntroductionRestrictions on use Features Supported switcherSupported remote cameras Precautions for use AccessoriesPrecautions for installation Make mount angles suitable for the installation locationExample of embedding the unit in a desktop Appearance ZzMount angle attachment positionUnit mm inch Parts and their functions Control panelMenu operation section Pan and tilt section Camera selection sectionFocus, zoom and iris section Color adjustment section Menu and memory selection section Indicator section User button section Memory card sectionZzMemory cards Rear panel About the external DC power supplyBasic operations of the unit Speed Basic operations for the menusShutter OffExamples of IP connections ConnectionsConnections „„Serial connections for AW‑HE120 remote cameras Examples of serial connections„„Serial connection for a remote camera AW‑HE50 or AW‑HE60 Supported camera ZzSwitch settings of AW-IF400ZzUse a straight cable category 5 or above for the LAN cable „„Serial connections for AW-PH650 and cameraSetting the default gateway Network settings of the unitSetting the subnet mask Setting the IP address of the unitDisplaying the MAC address Setting the reception port numberSetting Global Area Port CAM1Link settings Connection destination IP addressesOverview of related menus and operations SW CTL Setting the IP addresses automatically auto IP settingWhen configuring the settings for the first time CAM1 NoAsignAuto SET Renew IP ADR Auto SET SET UP ERRAuto SET Auto SET CompleteC001/004 S0/1 Remote camera DCAM2 Network CAM3 Network CAM4 NoAsign Turn the F2 dial to select Yes, and then press the F2 dial Connection destination IP address of CAM4192.168.000.200 Auto SET Keep IP ADR OVER! YESRetry Press the F2 dial to confirm the IP address Swapping connection destination IP addressesCAM1 192.168.000.003 CAM1 IP Duplicate192.168.000.008 Setting the connection destination port numberCAM1 SW IP AddressSelecting a camera group Selecting a camera groupSelecting a remote camera Troubleshooting Specifications „„Input/output connectors„„General Index Memo Memo For business users in the European Union

AW-RP120G specifications

The Panasonic AW-RP120G is a sophisticated remote camera controller designed for broadcasting and production environments that require precise control over multiple pan-tilt-zoom (PTZ) cameras. This versatile controller offers an extensive range of features, making it a reliable choice for professionals in the field.

One of the key highlights of the AW-RP120G is its user-friendly interface. It incorporates a large, LCD touchscreen display that provides real-time information and control options for both novice and experienced operators. The layout is intuitive, enabling quick access to various settings without the need for complex configurations. This allows operators to focus on their production rather than getting mired in technical details.

The AW-RP120G is equipped with the capability to control up to 200 PTZ cameras simultaneously, which caters to large-scale productions. This flexibility is crucial in various settings, from live events to studio broadcasts, where multiple camera angles and shots are necessary. The controller utilizes IP connectivity and supports the Panasonic’s proprietary protocol, ensuring seamless operation across a networked environment.

Another standout characteristic of the AW-RP120G is its advanced preset management system. Users can store and recall up to 100 preset camera positions, eliminating the need to manually adjust each PTZ camera during a live performance. This feature significantly enhances workflow efficiency and allows for smooth transitions between camera angles.

The device further incorporates advanced technologies, such as PoE (Power over Ethernet) compatibility, which simplifies installation by allowing power and data to be transmitted over a single cable. This reduces clutter and streamlines setup processes, particularly in complex environments.

In terms of design, the AW-RP120G is compact and portable, making it easy to integrate into various production setups. It is built with durability in mind, ensuring that it can withstand the rigors of frequent use in demanding environments.

Overall, the Panasonic AW-RP120G is a state-of-the-art remote controller that combines functionality, efficiency, and reliability. With its advanced features, it is an essential tool for any professional looking to elevate their camera operation capabilities in broadcasting and live event production. This makes it a valuable investment for those looking to enhance their production quality while streamlining their workflow.