77
Internet Setup (cont.)
Connecting using AOSS
If your access point supports AOSS, you can use this functionality for a simple setup. Also refer to the instruction manual for your access point.
Using AOSS may cause your access point settings to change. If you’re connected to a PC without using AOSS, it may no longer connect after using AOSS.
Applications | Internet Line |
| Broadband |
& Settings |
|
DSL Modem, etc. | Access Point with | Nintendo DSi XL System | |
Router Functionality | |||
|
|
How to Connect
Tap Connection Settings
Access point steps
Using AOSS
Press the AOSS Button until the lamp starts blinking |
|
If connection continues to fail when performing AOSS |
|
settings, wait approximately 5 minutes and then | AOSS |
try again. | Button |
Tap OK to perform a connection test
Using AOSS
78
Applications & Settings
Tap a connection labeled None.
NOTE: If you are using WPA security, you must use the Advanced Setup option and select Connection
4, 5, or 6 (see page 83).
Tap the AOSS icon
Proceed to the following access point steps.
If the connection test is successful, your settings are complete.
Immediately after completing settings for AOSS, connection may fail due to the restarting of the
access point. Wait a short time, then try performing a connection test again.
If you need more help getting connected, including security and firewall FAQs, visit