79
Internet Setup (cont.)
Searching for and connecting to an access point
| Broadband |
|
| |
| Internet Line |
|
| |
Applications & |
| Access Point with |
| |
Settings | DSL Modem, etc. | Nintendo DSi XL System | ||
Router Functionality | ||||
|
|
How to Connect
Tap Connection Settings
Tap a connection labeled None
NOTE: If you are using WPA security, you must use the Advanced Setup option and select Connection 4, 5, or 6 (see page 83).
Tap Search for an Access Point
Tap an access point to select it
If no access points are found, see Error
Code List on page 100.
80
If you are connecting to a secure access point, enter the key and tap OK.
This is displayed only when configured for security.
Applications & Settings
Tap OK
Tap OK to perform a connection test.
If the connection test is successful, settings are complete.
If connection fails, refer to the list of error codes on page 100.
Access points marked require that you enter the same key as is registered with the access point.
Key input not |
| Configured with an unsupported encryption |
required |
| format. To connect to access points with this |
| ||
Key input required |
| mark, configure settings through Advanced |
| Setup (see page 83). |
|
|
| Antenna Bars |
| |
The | icon indicates the state of signal reception |
|
|
|
|
and displays at four different levels. Stronger signal |
|
|
|
| |
reception results in smoother transmission. | 0 bars | 1 bar | 2 bars | 3 bars | |
|
| Weak |
|
| Strong |
|
|
| Signal Reception Strength |