Sega 999-0921 owner manual Assembling and Installation, Assy of Cabinet

4 . ASSEMBLING AND INSTALLATION

•Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling may cause damage to the machine, or malfunctioning to occur.

•When assembling, be sure to perform work by plural persons. Depending on the assembly work, there are some cases in which a single person performing the work can cause personal injury or parts damage.

•Be careful so as not to damage wirings. Damaged wiring can cause electric shock and short circuit hazards.

When carrying out the assembly work, follow the procedure in the following 5-item sequence:

1

2

3

4

ASSY OF THE CABINET

SECURING IN PLACE (ADJUSTER ADJUSTMENT)

POWER SUPPLY

ASSEMBLING CHECK

Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width across flats are required for the assembly work.

1

ASSY OF CABINET

Permanantly tightening the hex bolts should not be completed until the leg levelers are adjusted properly.

NOTE: Game is shipped fully assembled. No assembly required.