Sega 999-0921 owner manual Assembling Check, Memory Test

Page 15

4

ASSEMBLING CHECK

In the TEST MODE, ascertain that the assembly has been made correctly and that the IC BOARD is satisfactory.

In the test mode, perform the following test:

(1) MEMORY TEST

MEMORY TEST MODE

RAM TEST
IC29 GOOD
IC34 GOOD
IC16 GOOD	IC18 GOOD
IC20 GOOD	IC22 GOOD
IC9 GOOD	IC10 GOOD
IC11 GOOD	IC12 GOOD

PRESS TEST BUTTON TO EXIT

(2) C.R.T. TEST

C.R.T. TEST 1/2

RED

GREEN

BLUE

WHITE

PRESS TEST BUTTON TO CONTINUE

C.R.T. TEST 2/2

Selecting the RAM TEST item on the test mode menu screen causes the on-board memory to be tested automatically. The game board is satisfac- tory if the display beside each IC No. shows GOOD.

In the TEST mode menu, selecting C.R.T. TEST allows the screen (on which the monitor is tested) to be displayed. Although the monitor adjustments have been made at the time of shipment from the factory, color deviation, etc., may occur due to the effects of geomagnetism, the location of the building’s steel frames and other game machines in the periphery. By watching the test mode screen, make judgement as to whether an adjust- ment is needed. If it is neccessary, adjust the monitor by refering to Chapter 12.

PRESS TEST BUTTON TO EXIT

Image 15

Contents Manual no Warranty Table of Contents Sega ENTERPRISES, INC. USA General Precautions Installation Precautions Precautions to be Heeded for Operation Precautions to be Heeded During Operation Name of Parts Accessories Never Ship Model 3 / Naomi Game Boards Outside of Cage Assy of Cabinet Assembling and InstallationSecuring in Place Adjuster Adjustment Power Supply Memory Test Assembling CheckInput Test Precations to be Heeded When Moving the Machine Contents of Game Operation Selector Name Entry Destination Items Description Chapters Explanation of Test and Data DisplayService Button Service SW Switch Unit and Coin MeterSpeaker Volume Speakers Speaker Volume Super WooferCabinet Type R.T. Test RGB Color Adjustment Screen Coin Assignments Manual Setting COIN/CREDIT Setting Coin Chute Common Type Bonus Adder Sequence 3 ~ 8 not Used Menu Mode Roll Left Effect Setting the Steering Wheel Volume Number of Games Backup Data Clear Removing the Control Mechanism Handle MechaPage Page CUT Face Handle Shaft CUT Face Volume MAY not Appear AS Shown Removing the Shift Lever Shift LeverSwitch Replacement 10 1 Removing the Accelerator and the Brake Accelerator & BrakeAdjustment 10 2 Adjusting or Replacing the Volume10 3 Greasing ReplacementHandling the Coin JAM Coin SelectorOptional Dollar Bill Acceptor Page Coin door shown with optional dollar bill validator insered Primary side and secondary side Monitor12 2 Cautions to be Heeded When Cleaning the CRT Surfaces 12 3 Adjustment Method Replacing the Fluorescent Lamp and Buttons Fluorescent LampStart Button and View Change Button Page Periodic Inspection Table Cleaning Cabinet SurfacesProblems Cause Countermeasures Troubleshooting16 -1 Locating the Game Board Game Board16 2 Composition of Game Board Design Related Parts TOP Assembly PTR Parts ListAssy Billboard Assy Steering Unit Page AC Brkt Assy AC Unit DRT1-0400Assy Coin Chute Tower SW Unit Page Assy Switch Unit INY-1180 Assy HI/LOW/BACK Shifter 50-2771-00EX Trunnion for I.L. Turbo Shifter Assy Accel and Brake SPG-2200 Base Assy of Handle Mecha Assy Sensor Unit PTR-2550 Sticker VR Button Assy VR Button Start and 1 View PTR-2600Assy Woofer Assy Main Board PTR-4000 Assy AMP Board PTR1-4200 Assy of Power Supply PTR-4300 Page Page Visit OUR Website