To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.
Press the SERVICE BUTTON to move the arrow to the desired item.
1
2 Change the desired item setting by using the TEST BUTTON. 3
The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as the basic numbers of coins and credits. This mode expresses “how many coins correspond to how many credits.”
SETTING CHANGE PROCEDURE
Setting changes cannot be stored unless the TEST BUTTON is pressed while the arrow is on EXIT.
COIN ASSIGNMENTS
COIN CHUTE TYPE COIN/CREDIT SETTING
COIN CHUTE #1 1 COIN 1 CREDIT
COIN CHUTE #2 1 COIN 1 CREDIT
MANUAL SETTING
SEQUENCE SETTING -> EXIT
B COIN ASSIGNMENTS
COMMON #1
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
(COMMON SETTING)
(A)COIN CHUTE TYPE (COMMON, INDIVIDUAL)
Set to COMMON.
(A)
(B)
(C)
(D)
Up to 2 Coin Chutes (#1 and #2) can be used and also, (B) COIN/CREDIT SETTING ratio can be set seperately for #1 and #2.
(B)COIN/CREDIT SETTING (#1 ~ #27)
Sets the credit increase increment per coin insertion. There are 27 settings from #1 to #27, expressed in 
credit(s) as against 
coins inserted. #27 refers to FREE PLAY.