Roll Left

A. INPUT TEST

Select INPUT TEST to have the screen shown below appear and to observe the status of each switch on the Control Panel. In this mode, Periodically check the status of each switch.

	INPUT TEST
COIN CHUTE #1		OFF
COIN CHUTE #2		OFF
SERVICE		OFF
TEST		OFF
START		OFF
VIEW		OFF
HORN		OFF
SHIFT	[L]	OFF
SHIFT	[H]	OFF
SHIFT	[R]	OFF
HANDLE		XXH
ACCEL		XXH
BRAKE		XXH

PRESS TEST AND SERVICE BUTTON TO EXIT

By pressing each switch, if the display on the right-hand side of the name of each switch changes from OFF to ON, the SW and the wiring connections are satisfactory.

Operate CONTROL WHEEL, THRUST LEVER, etc. to check Volume value display variation.

To check COIN CHUTE 1 & COIN CHUTE 2, open the COIN CHUTE DOOR and insert a coin(s) in the slot.

“HORN” is for the driver seat and the assisstant driver seat. Because the same circuit is used for the HORN in both seats, if the switch and the wiring connection are satisfactory, pressing the HORN at either side changes the display from OFF to ON.

For the steering wheel, the accelerator, and the brake, operate each input device and check to see if the value changes in accordance with operation. Items to be checked :

Each switch (COIN/SERVICE/TEST/START/VIEW CHANGE/HORN/SHIFT<H L R>)

Each volume (STEERING WHEEL/ACCELERATOR/ BRAKE)

Press the TEST BUTTON and the SERVICE BUTTON simulta- neously to return to the menu screen.

B. OUTPUT TEST

Select OUTPUT TEST to cause the following screen to appear, and to check the status of each lamp and motor. In this mode, periodically check each lamp and motor.

	OUTPUT TEST
START LAMP	OFF
VIEW LAMP	OFF
HORN LAMP	OFF
ROLL LEFT	OFF
ROLL RIGHT	OFF
-> EXIT

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON

Using the SERVICE button, bring the arrow to the desired item and press the TEST button. The display next to the item changes from OFF to ON, and the lamp lights up, or the motor functions.

LAMP item	: If the lamp lights up, operation is satisfactory.
ROLL LEFT	: If the motor moves so as to turn the steering
	wheel counterclockwise, operation is
	satisfactory.
ROLL RIGHT	: If the motor moves so as to turn the steering
	wheel clockwise, operation is satisfactory.

Bring the arrow to EXIT and press the TEST BUTTON to return to the menu screen.

A. INPUT TEST

B. OUTPUT TEST

ROLL RIGHT