PROGRAMMING TV/VCR COMBO CONTROL
Setup Codes for TV/VCR Combos (continued):
Magnin | 0240 |
|
Memorex | 0037, 0162 (for TV use 0250) | |
Mitsubishi | 0048 | (for TV use 0093) |
Orion | 0002, 0294, 0479 | |
Panasonic | 0035 | (for TV use 0051), 0162 (for TV use 0250) |
Penney | 0035 | (for TV use 0051), 0240, 0162 (for TV use 0250) |
Quasar | 0035 | (for TV use 0051), 0162 (for TV use 0250) |
RCA | 0060 | (for TV use 0047), 0035 (for TV use 0051), |
| 0048 | (for TV use 0093) |
Sansui | 0000, 0479 | |
Sanyo | 0240 |
|
Sears | 0000, 0037 | |
Sharp | 0048 | (for TV use 0093) |
Sony | 0032 | (for TV use 0000) |
Symphonic | 0000 |
|
Zenith | 0000 |
|
PROGRAMMING CABLE CONVERTER (OR DBS RECEIVER) CONTROL
The Millennium 4 is preprogrammed at the factory to operate the cable converter given to you by your cable company. However, if you have another brand or model of cable converter or satellite receiver that you would like to control, then you’ll need to perform the following instructions to unlock the cable key, enter in a new code, and lock the cable key again.
To Unlock the CBL Key:
1.Turn on the Cable Converter or DBS Receiver.
2. 
On the Millennium 4, press CBL once. Press and hold SETUP until the LED blinks twice, then release SETUP.
3. 
Enter 9 - 9 - 7. The LED will blink twice.
4. 
Press CH- once. The LED will blink twice.
18