PROGRAMMING AUDIO CONTROL
Setup Codes for Audio Amplifiers (continued):
Victor | 0074 |
Wards | 0014, 0054 |
Yamaha | 0176, 1176, 0186 |
Yorx | 0195 |
Zenith | 0857 |
SEARCHING FOR YOUR CODE
If your TV,VCR or DVD Player, Cable Converter, or Audio Component does not respond to the Millennium 4 after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.
For example, to search for a code for your TV:
1.Turn on your TV.
2. 
On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP.
3.
Enter 9 - 9 - 1. The LED will blink twice.
4.Aim the remote control at the the TV and slowly
alternate between pressing POWER and TV. Stop when the TV turns off.
NOTE: In the search mode, the Millennium 4 will send IR codes from its library to the selected compo- nent, starting with the most popular code first.
5.
Press SETUP once to lock in the code.
6.To search for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., VCR, CBL, or AUDIO) for the (VCR or DVD, Cable, or Audio) component you are searching for.
24