CHANGING VOLUME LOCK
The Millennium 4 is set to control volume of a component through your TV while in the TV,VCR, or Cable mode. However, in the Audio mode, you have separate control of of your audio component’s volume.
If your TV is not remote controllable, or if you would like the volume to be controlled by a different component, you can change the Volume Lock setting to control a volume through a
To Change Volume Lock to the Cable Mode:
1. 
On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP.
2. 
Enter 9 - 9 - 3 and then press CBL once. The LED will blink twice.
3.Now, whenever you press VOL+,
To Change Volume Lock to the TV Mode:
1. 
On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP.
2. 
Enter 9 - 9 - 3 and then press TV once. The LED will blink twice.
3.Now, whenever you press VOL+,
To Change Volume Lock to the VCR Mode:
1. 
On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP.
2. 
Enter 9 - 9 - 3 and then press VCR once. The LED will blink twice.
3.Now, whenever you press press VOL+,
continued on next page...
27