Universal Electronics 4 To Activate Channel Control Lock, To De-Activate Channel Control Lock

Page 21

Next Level

0869, 0892

Philips

0749, 1076

Proscan

0392

RCA

0566, 0392

RadioShack

0869

Samsung

1109

Sony

0639

Star Choice

0869

Toshiba

0749

PROGRAMMING CHANNEL CONTROL LOCK

By activating this feature, the Millennium 4 will only allow access to the channel control capabilities of your cable converter. This will guarantee that you do not inadvertently change the channel on your TV or VCR.

To Activate Channel Control Lock:

1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP.

2. Enter 9 - 9 - 6. The LED will blink twice.

3. Press CH+ once. The LED will blink twice.

4.Now, regardless of what mode you select (i.e., TV, VCR, or CBL), only the channel control capa- bility of your cable converter will be accessible.

NOTE: This feature does not affect the Audio mode.

To De-Activate Channel Control Lock:

1. On the Millennium 4, press and hold SETUP until the LED blinks twice, then release SETUP.

2. Enter 9 - 9 - 6. The LED will blink twice.

3. Press CH- once. The LED will blink twice.

4.The Millennium 4 will again provide TV and VCR channel control capabilities while in the TV or VCR mode.

21

Image 21
Contents Millennium Table of Contents Introduction Features and Functions Use Guide to display the program guide Key ChartsFeatures and Functions Installing Batteries Setup Codes for TVs Programming TV ControlAOC JBL CXCJCB JVCMGA LXIMTC NADTMK Programming VCR/DVD Player Control CCE Setup Codes for VCRsHI-Q KLHMEI STS Setup Codes for DVD PlayersProgramming TV/VCR Combo Control Setup Codes for DVD PlayersSetup Codes for TV/VCR Combos Programming Cable Converter or DBS Receiver Control To Unlock the CBL KeyCable Converter Brand DBS Receiver Brand To Program the CBL KeySetup Codes for DBS Receivers Setup Codes for Cable ConvertersTo Lock the CBL Key ABCTo Activate Channel Control Lock To De-Activate Channel Control LockProgramming Channel Control Lock Programming Audio Control Setup Codes for Audio AmplifiersSetup Codes for Audio Receivers ADCMCS Searching for Your Code Enter 9 9 0. The LED will blink twice Checking the CodesTV Audio RE-ASSIGNING Device KeysTo Change Volume Lock to the Cable Mode Changing Volume LockChanging Volume Lock Troubleshooting ProblemSolution Additional Information