Sharp CV-2P10SC operation manual Precautions, Radio or TV Interference

Page 6

PRECAUTIONS

Points to keep in mind when using your unit.

WARNINGS FOR USE

•Install the unit in accordance with the installation instructions in the latter section of this manual.

•Do not modify any part of this product.

•Do not insert anything into any part of the unit.

•Ensure the power supply used has an appropriate voltage rating.

Only use a three-pin grounded electrical AC socket rated 125V, 60Hz, and 15 amps or more.

Use of a power supply with an improper voltage rating can result in damage to the unit and possibly fire.

•Always use a fuse with the proper amp rating.

Do not, under any circumstances, use wire, pins or other objects in place of a proper fuse.

•In the event of any abnormality with the unit (ex. a burning smell), turn it off imme- diately and disconnect the power supply and contact a Sharp authorized service center.

WARNING FOR POWER SUPPLY CORD

•This unit uses a plug with a built-in fuse.

Read the precautions on the plug before using the unit.

•Always conduct a “Power Plug Check” before use to confirm the power plug func- tions normally.

•This power plug must only be plugged into an appropriate wall socket. Do not use in conjunction with any extension cords.

•Push the power plug securely into the socket and make sure it is not loose.

•Do not pull, deform, or modify the power supply cord, or immerse it in water. Pulling or misuse of the power supply cord can result in damage to the unit and cause electrical shock.

•A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and not repaired. Replacement must be performed by manufacture's service agent in order to avoid a hazard.

Radio or TV Interference

If this room air conditioner should cause interference to radio or television reception, try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the room air conditioner and radio/TV receiver.

•Connect the room air conditioner into an outlet on a circuit different from that to which the radio/TV receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

EN-4

CV-2P10SC_en.indd 4

11.3.22 11:00:11 AM

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CV-2P10SC Page Contents EnglishFor Customer Assistance the United States Consumer Limited Warranty Consumer Limited Warranty for the U.S. UsersPrecautions Radio or TV InterferenceUsage Cautions Drainage should be performed whenever moving the unitOperating Conditions Energy Efficiency TipsSuggested Tools for Window Panel Installation LocationIncluded Part Names Front View Rear ViewION Mode only Remote ControlAIR CON Mode only Remote Control DisplayAttach the guard combined above to Install Window PanelGuard net Window panelUse the window panel and the adjustment panel Attach the guard combined above to the window panel Inner height of the window 28.3 718mm 45.3 1150mm Installation and Removal of Exhaust Hose Removal of the exhaust hose Remove the window adapter Remove the exhaust hose from the unitRemove the battery cover Insert two batteries. AAAR03 Power Plug CheckPress the Reset button until you hear another Click PRE-OPERATION ChecksHOW to USE the Remote Control USE for AIR Conditioner Cool ModeDehumidification Mode To Turn OFFPress the Mode button to select FAN mode FAN ModeVentilation Mode Press the FAN button to set fan speedPress the Louvers button again to stop the desired position To Change AIR Flow DirectionUP / Down AIR Flow Direction Left / Right AIR Flow DirectionTo Cancel MAX Cool OperationSleep Operation Timer Operation On TimerOFF Timer ION Generator Mode USE for ION GeneratorPress the ION button to start operation MAX Density Operation Press the MAX Density button during Ion generator operationPress the MAX Density button again Press the Refresh button during Ion generator operation OFF Timer OperationRefresh Operation Press the Refresh button againMain Unit Operation Press the Power button to start opera TionPress the Power button during opera Tion DrainageCleaning the Unit and the Remote Control MaintenanceCleaning the Filter Before NON-USE for a Long PeriodBefore Calling for Service Acondicionador DE Aire Para Habitacion CV-2P10SC ÍndiceDeclaración de Conformidad Parte ResponsableSolicitu DE Servicio AL Cliente Estados Unidos Garantía Limitadaal Consumidor Garantía Limitada DEL Consumidor Para Usuarios DE EE.UUAdvertencia Para EL Cable Desuministro DE Energia PrecaucionesAdvertencias Para EL USO Interferecias de Radio o TVAdvertencia Acerca DE LA CO- Nexión a Tierra Precauciones Para EL USOObservaciones Sobre EL Funcionamiento Condiciones DE FuncionamientoConsejos Para EL Rendimiento DE Energía Ubicación Piezas IncluidasNombre DE LAS Piezas Parte Delantera Parte TraseraSolamente Modo ION Control RemotoSolamente Modo AIR CON ComúnInstalación DEL Panel DE Ventana Instalación en una ventana de guillotina dobleFije el soporte con un tornillo. Recomendado ES-12 ES-13 Instalación Y Desmontaje DE LA Manguera DE Escape Fije el adaptador de la manguera de escape a la unidadES-15 Inspecciones Antes DEL USO Presione el botón de reinicio ResetPresione el botón Reset hasta que es- cuche otro Clic Colocacion DE LAS PilasForma DE Usar EL Control Remoto Modo Deshumidificación USO Para EL Acondicionador DE AireModo Enfriar DesactivaciónModo Ventilador Modo VentilaciónPresione el botón Louvers Cambio DE LA Dirección DE Flujo DE AireDirección DEL Flujo DE Aire Hacia ARRI- BA/ABAJO Flujo DE LA Corriente DE Aire Hacia LA IZQUIERDA/DERECHACancelar Operacion Enfriamiento MaximoOperacion DE Dormir Funcionamiento CON EL Temporizador Activación DEL TemporizadorDesactivación DEL Temporizador USO Para Generador DE ION Modo ION GeneratorPresione el botón ION para iniciar el funcio- namiento Dirección DE Flujo DE Aire Hacia ARRI- BA/ABAJO USO Para ION GeneratorOperacion Maxima Densidad Presione nuevamente el botón MAX DensityOperacion Refrescar Operacion Desactivación DEL TemporizadorPresione nuevamente el botón Refresh Funcionamiento DE LA Unidad Principal Presione el botón Power para iniciar el FuncionamientoPresione el botón Power durante la operacion DrenajeLimpieza DE LA Unidad Y DEL Control Remoto MantenimientoLimpiando EL Filtro Antes DE UN no USO POR UN Largo PeriodoAntes DE Llamar AL Departamento DE Servicio Técnico Page Sharp Plaza, Mahwah New Jersey 07495-1163 U.S.A

CV-2P10SC specifications

The Sharp CV-2P10SC is a state-of-the-art portable air conditioner designed to deliver efficient cooling performance while prioritizing user comfort and convenience. With a sleek and modern design, this air conditioning unit is not only functional but also enhances the aesthetic appeal of any space it occupies.

One of the standout features of the Sharp CV-2P10SC is its powerful cooling capacity of 10,000 BTU, making it suitable for medium-sized rooms up to 25 square meters. This unit effectively lowers indoor temperatures, providing a refreshing environment during hot summer months. Additionally, it boasts a dehumidification function, which helps remove excess moisture from the air, creating a more comfortable atmosphere.

Equipped with a user-friendly control panel and remote control, the Sharp CV-2P10SC ensures that adjusting temperature settings and other functions is simple and convenient. The intuitive controls allow users to select from multiple fan speeds, temperature settings, and operational modes, including cooling, fan, and dehumidification modes. The programmable timer feature further adds to its versatility, allowing users to set the unit to turn on or off at desired times.

The Sharp CV-2P10SC incorporates advanced technologies for energy efficiency. It is designed with an eco-friendly R32 refrigerant, which has a lower global warming potential compared to traditional refrigerants. This not only supports environmental sustainability but also contributes to reduced energy consumption, ultimately leading to lower electricity bills.

Another significant characteristic of the CV-2P10SC is its portability. The unit comes with integrated wheels, making it easy to relocate from one room to another as needed. This flexibility means users can enjoy cool air in any area of their home, whether it’s the living room, bedroom, or office.

Noise levels are kept to a minimum, thanks to its efficient design and technology, ensuring that the unit operates quietly while delivering powerful cooling performance. This is particularly beneficial for nighttime use or in settings where noise could be disruptive.

Overall, the Sharp CV-2P10SC combines robust cooling capabilities, advanced technology, and user-friendly features to provide an exceptional indoor climate control solution that meets the needs of modern consumers. Whether for daily use or special occasions, it stands out as an excellent choice for anyone seeking reliable and efficient portable cooling.
Top Page Image Contents