Sharp CV-2P10SC operation manual Timer Operation, On Timer, OFF Timer

Page 24

USE FOR AIR CONDITIONER

TIMER OPERATION

ON TIMER

1 Press the ON TIMER button and set the time as desired.

0.5h 1.0h 1.5h10h 11h 12h

• The orange TIMER lamp will light.

• The time setting will count down to show the re- maining time.

TO CANCEL

Press the CANCEL button.

• The orange TIMER lamp will turn off.

1

CANCEL

OFF TIMER

1 Press the OFF TIMER button and set the time as desired.

0.5h 1.0h 1.5h10h 11h 12h

• The orange TIMER lamp will light.

• The time setting will count down to show the re- maining time.

TO CANCEL

Press the CANCEL button.

• The orange TIMER lamp will turn off.

1

CANCEL

NOTES:

•Timer duration can be set from a minimum of half an hour to a maximum of 12 hours.

Up to 9.5 hours, you can set in half-hour increments and from 10 to 12 hours, in 1-hour increments.

•The OFF TIMER and ON TIMER can not be set together.

•If a power failure occurs while the OFF TIMER or ON TIMER is set, the TIMER setting will be can- celled and will not be retrieved even after the power is restored.

•When the temperature is set during timer setting, the temperature will show in the display for 5 sec- onds and then return to the timer display.

EN-22

CV-2P10SC_en.indd 22

11.3.22 11:00:17 AM

Page 23 Page 25
Image 24
Page 23 Page 25
Contents CV-2P10SC Page Contents EnglishFor Customer Assistance the United States Consumer Limited Warranty Consumer Limited Warranty for the U.S. UsersPrecautions Radio or TV InterferenceUsage Cautions Drainage should be performed whenever moving the unitOperating Conditions Energy Efficiency TipsSuggested Tools for Window Panel Installation LocationIncluded Part Names Front View Rear ViewRemote Control AIR CON Mode onlyION Mode only Remote Control DisplayInstall Window Panel Guard netAttach the guard combined above to Window panelUse the window panel and the adjustment panel Attach the guard combined above to the window panel Inner height of the window 28.3 718mm 45.3 1150mm Installation and Removal of Exhaust Hose Removal of the exhaust hose Remove the window adapter Remove the exhaust hose from the unitPower Plug Check Press the Reset button until you hear another ClickRemove the battery cover Insert two batteries. AAAR03 PRE-OPERATION ChecksHOW to USE the Remote Control Cool Mode Dehumidification ModeUSE for AIR Conditioner To Turn OFFFAN Mode Ventilation ModePress the Mode button to select FAN mode Press the FAN button to set fan speedTo Change AIR Flow Direction UP / Down AIR Flow DirectionPress the Louvers button again to stop the desired position Left / Right AIR Flow DirectionTo Cancel MAX Cool OperationSleep Operation Timer Operation On TimerOFF Timer ION Generator Mode USE for ION GeneratorPress the ION button to start operation MAX Density Operation Press the MAX Density button during Ion generator operationPress the MAX Density button again OFF Timer Operation Refresh OperationPress the Refresh button during Ion generator operation Press the Refresh button againPress the Power button to start opera Tion Press the Power button during opera TionMain Unit Operation DrainageMaintenance Cleaning the FilterCleaning the Unit and the Remote Control Before NON-USE for a Long PeriodBefore Calling for Service Índice Declaración de ConformidadAcondicionador DE Aire Para Habitacion CV-2P10SC Parte ResponsableSolicitu DE Servicio AL Cliente Estados Unidos Garantía Limitadaal Consumidor Garantía Limitada DEL Consumidor Para Usuarios DE EE.UUPrecauciones Advertencias Para EL USOAdvertencia Para EL Cable Desuministro DE Energia Interferecias de Radio o TVAdvertencia Acerca DE LA CO- Nexión a Tierra Precauciones Para EL USOObservaciones Sobre EL Funcionamiento Condiciones DE FuncionamientoConsejos Para EL Rendimiento DE Energía Ubicación Piezas IncluidasNombre DE LAS Piezas Parte Delantera Parte TraseraControl Remoto Solamente Modo AIR CONSolamente Modo ION ComúnInstalación DEL Panel DE Ventana Instalación en una ventana de guillotina dobleFije el soporte con un tornillo. Recomendado ES-12 ES-13 Instalación Y Desmontaje DE LA Manguera DE Escape Fije el adaptador de la manguera de escape a la unidadES-15 Presione el botón de reinicio Reset Presione el botón Reset hasta que es- cuche otro ClicInspecciones Antes DEL USO Colocacion DE LAS PilasForma DE Usar EL Control Remoto USO Para EL Acondicionador DE Aire Modo EnfriarModo Deshumidificación DesactivaciónModo Ventilador Modo VentilaciónCambio DE LA Dirección DE Flujo DE Aire Dirección DEL Flujo DE Aire Hacia ARRI- BA/ABAJOPresione el botón Louvers Flujo DE LA Corriente DE Aire Hacia LA IZQUIERDA/DERECHACancelar Operacion Enfriamiento MaximoOperacion DE Dormir Funcionamiento CON EL Temporizador Activación DEL TemporizadorDesactivación DEL Temporizador USO Para Generador DE ION Modo ION GeneratorPresione el botón ION para iniciar el funcio- namiento USO Para ION Generator Operacion Maxima DensidadDirección DE Flujo DE Aire Hacia ARRI- BA/ABAJO Presione nuevamente el botón MAX DensityOperacion Refrescar Operacion Desactivación DEL TemporizadorPresione nuevamente el botón Refresh Presione el botón Power para iniciar el Funcionamiento Presione el botón Power durante la operacionFuncionamiento DE LA Unidad Principal DrenajeMantenimiento Limpiando EL FiltroLimpieza DE LA Unidad Y DEL Control Remoto Antes DE UN no USO POR UN Largo PeriodoAntes DE Llamar AL Departamento DE Servicio Técnico Page Sharp Plaza, Mahwah New Jersey 07495-1163 U.S.A

CV-2P10SC specifications

The Sharp CV-2P10SC is a state-of-the-art portable air conditioner designed to deliver efficient cooling performance while prioritizing user comfort and convenience. With a sleek and modern design, this air conditioning unit is not only functional but also enhances the aesthetic appeal of any space it occupies.

One of the standout features of the Sharp CV-2P10SC is its powerful cooling capacity of 10,000 BTU, making it suitable for medium-sized rooms up to 25 square meters. This unit effectively lowers indoor temperatures, providing a refreshing environment during hot summer months. Additionally, it boasts a dehumidification function, which helps remove excess moisture from the air, creating a more comfortable atmosphere.

Equipped with a user-friendly control panel and remote control, the Sharp CV-2P10SC ensures that adjusting temperature settings and other functions is simple and convenient. The intuitive controls allow users to select from multiple fan speeds, temperature settings, and operational modes, including cooling, fan, and dehumidification modes. The programmable timer feature further adds to its versatility, allowing users to set the unit to turn on or off at desired times.

The Sharp CV-2P10SC incorporates advanced technologies for energy efficiency. It is designed with an eco-friendly R32 refrigerant, which has a lower global warming potential compared to traditional refrigerants. This not only supports environmental sustainability but also contributes to reduced energy consumption, ultimately leading to lower electricity bills.

Another significant characteristic of the CV-2P10SC is its portability. The unit comes with integrated wheels, making it easy to relocate from one room to another as needed. This flexibility means users can enjoy cool air in any area of their home, whether it’s the living room, bedroom, or office.

Noise levels are kept to a minimum, thanks to its efficient design and technology, ensuring that the unit operates quietly while delivering powerful cooling performance. This is particularly beneficial for nighttime use or in settings where noise could be disruptive.

Overall, the Sharp CV-2P10SC combines robust cooling capabilities, advanced technology, and user-friendly features to provide an exceptional indoor climate control solution that meets the needs of modern consumers. Whether for daily use or special occasions, it stands out as an excellent choice for anyone seeking reliable and efficient portable cooling.
Top Page Image Contents