Sharp CV-2P10SC operation manual Location, Included, Suggested Tools for Window Panel Installation

Page 9

LOCATION

•The unit should be placed on a firm foundation to minimize noise and vibration. For safe and secure positioning, place the unit on a smooth, level floor strong enough to support the unit. This will also help to avoid water spilling out into the room.

•The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use caution when rolling on carpet surfaces. Do not attempt to roll the unit over objects.

•The unit must be placed within reach of a properly rated grounded socket.

•Never place any obstacles around the air inlet or out- let of the unit.

•Allow at least 12" (30cm) of space from the wall for efficient air-conditioning.

MIN.12"

(30cm)

MIN.12"

(30cm)

MIN.12"

(30cm)

ENGLISH

INCLUDED

 

 

 

Exhaust hose

 

Rain guard

 

 

1

 

2

Window adapter

 

Insect guard net

 

 

1

 

1

Bracket

 

Foam seal A

 

 

1

 

1

Screw

 

Foam seal B

 

 

8

(adhesive type)

1

Window kit

 

Manual

 

 

Window panel

 

1

 

Exhaust cover

 

 

 

 

Remote control

 

 

 

 

1

 

 

Battery

 

 

 

(AAA.1.5V)

2

Extension panel

Adjustment panel

 

 

 

SUGGESTED TOOLS FOR WINDOW PANEL INSTALLATION

1.Screwdriver(medium size Phillips) 2. Tape measure or ruler 3. Knife or scissors

4.Saw (In the event that the window panel needs to be cut down in size because the win- dow is too narrow for direct installation.)

EN-7

CV-2P10SC_en.indd 7

11.3.22 11:00:12 AM

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CV-2P10SC Page English ContentsFor Customer Assistance the United States Consumer Limited Warranty for the U.S. Users Consumer Limited WarrantyRadio or TV Interference PrecautionsDrainage should be performed whenever moving the unit Usage CautionsEnergy Efficiency Tips Operating ConditionsSuggested Tools for Window Panel Installation LocationIncluded Front View Rear View Part NamesAIR CON Mode only Remote ControlION Mode only Remote Control DisplayGuard net Install Window PanelAttach the guard combined above to Window panelUse the window panel and the adjustment panel Attach the guard combined above to the window panel Inner height of the window 28.3 718mm 45.3 1150mm Installation and Removal of Exhaust Hose Remove the exhaust hose from the unit Removal of the exhaust hose Remove the window adapterPress the Reset button until you hear another Click Power Plug CheckRemove the battery cover Insert two batteries. AAAR03 PRE-OPERATION ChecksHOW to USE the Remote Control Dehumidification Mode Cool ModeUSE for AIR Conditioner To Turn OFFVentilation Mode FAN ModePress the Mode button to select FAN mode Press the FAN button to set fan speedUP / Down AIR Flow Direction To Change AIR Flow DirectionPress the Louvers button again to stop the desired position Left / Right AIR Flow DirectionTo Cancel MAX Cool OperationSleep Operation Timer Operation On TimerOFF Timer ION Generator Mode USE for ION GeneratorPress the ION button to start operation MAX Density Operation Press the MAX Density button during Ion generator operationPress the MAX Density button again Refresh Operation OFF Timer OperationPress the Refresh button during Ion generator operation Press the Refresh button againPress the Power button during opera Tion Press the Power button to start opera TionMain Unit Operation DrainageCleaning the Filter MaintenanceCleaning the Unit and the Remote Control Before NON-USE for a Long PeriodBefore Calling for Service Declaración de Conformidad ÍndiceAcondicionador DE Aire Para Habitacion CV-2P10SC Parte ResponsableSolicitu DE Servicio AL Cliente Estados Unidos Garantía Limitada DEL Consumidor Para Usuarios DE EE.UU Garantía Limitadaal ConsumidorAdvertencias Para EL USO PrecaucionesAdvertencia Para EL Cable Desuministro DE Energia Interferecias de Radio o TVPrecauciones Para EL USO Advertencia Acerca DE LA CO- Nexión a TierraObservaciones Sobre EL Funcionamiento Condiciones DE FuncionamientoConsejos Para EL Rendimiento DE Energía Piezas Incluidas UbicaciónParte Delantera Parte Trasera Nombre DE LAS PiezasSolamente Modo AIR CON Control RemotoSolamente Modo ION ComúnInstalación en una ventana de guillotina doble Instalación DEL Panel DE VentanaFije el soporte con un tornillo. Recomendado ES-12 ES-13 Fije el adaptador de la manguera de escape a la unidad Instalación Y Desmontaje DE LA Manguera DE EscapeES-15 Presione el botón Reset hasta que es- cuche otro Clic Presione el botón de reinicio ResetInspecciones Antes DEL USO Colocacion DE LAS PilasForma DE Usar EL Control Remoto Modo Enfriar USO Para EL Acondicionador DE AireModo Deshumidificación DesactivaciónModo Ventilación Modo VentiladorDirección DEL Flujo DE Aire Hacia ARRI- BA/ABAJO Cambio DE LA Dirección DE Flujo DE AirePresione el botón Louvers Flujo DE LA Corriente DE Aire Hacia LA IZQUIERDA/DERECHACancelar Operacion Enfriamiento MaximoOperacion DE Dormir Funcionamiento CON EL Temporizador Activación DEL TemporizadorDesactivación DEL Temporizador USO Para Generador DE ION Modo ION GeneratorPresione el botón ION para iniciar el funcio- namiento Operacion Maxima Densidad USO Para ION GeneratorDirección DE Flujo DE Aire Hacia ARRI- BA/ABAJO Presione nuevamente el botón MAX DensityOperacion Refrescar Operacion Desactivación DEL TemporizadorPresione nuevamente el botón Refresh Presione el botón Power durante la operacion Presione el botón Power para iniciar el FuncionamientoFuncionamiento DE LA Unidad Principal DrenajeLimpiando EL Filtro MantenimientoLimpieza DE LA Unidad Y DEL Control Remoto Antes DE UN no USO POR UN Largo PeriodoAntes DE Llamar AL Departamento DE Servicio Técnico Page Sharp Plaza, Mahwah New Jersey 07495-1163 U.S.A

CV-2P10SC specifications

The Sharp CV-2P10SC is a state-of-the-art portable air conditioner designed to deliver efficient cooling performance while prioritizing user comfort and convenience. With a sleek and modern design, this air conditioning unit is not only functional but also enhances the aesthetic appeal of any space it occupies.

One of the standout features of the Sharp CV-2P10SC is its powerful cooling capacity of 10,000 BTU, making it suitable for medium-sized rooms up to 25 square meters. This unit effectively lowers indoor temperatures, providing a refreshing environment during hot summer months. Additionally, it boasts a dehumidification function, which helps remove excess moisture from the air, creating a more comfortable atmosphere.

Equipped with a user-friendly control panel and remote control, the Sharp CV-2P10SC ensures that adjusting temperature settings and other functions is simple and convenient. The intuitive controls allow users to select from multiple fan speeds, temperature settings, and operational modes, including cooling, fan, and dehumidification modes. The programmable timer feature further adds to its versatility, allowing users to set the unit to turn on or off at desired times.

The Sharp CV-2P10SC incorporates advanced technologies for energy efficiency. It is designed with an eco-friendly R32 refrigerant, which has a lower global warming potential compared to traditional refrigerants. This not only supports environmental sustainability but also contributes to reduced energy consumption, ultimately leading to lower electricity bills.

Another significant characteristic of the CV-2P10SC is its portability. The unit comes with integrated wheels, making it easy to relocate from one room to another as needed. This flexibility means users can enjoy cool air in any area of their home, whether it’s the living room, bedroom, or office.

Noise levels are kept to a minimum, thanks to its efficient design and technology, ensuring that the unit operates quietly while delivering powerful cooling performance. This is particularly beneficial for nighttime use or in settings where noise could be disruptive.

Overall, the Sharp CV-2P10SC combines robust cooling capabilities, advanced technology, and user-friendly features to provide an exceptional indoor climate control solution that meets the needs of modern consumers. Whether for daily use or special occasions, it stands out as an excellent choice for anyone seeking reliable and efficient portable cooling.
Top Page Image Contents