Cisco 6100 Series System Cables 3 |
Figure 3-9 shows the cabling between the xDSL subscriber line connectors on the PSC and the MDF in which the cables listed in Table 3-5 are used.
Figure 3-9 PSC to MDF Cabling Diagram with Two-to-Two Cables—xDSL Subscriber Line
Connectors |
|
|
|
|
Cisco 6120 | J2 |
|
| J3 |
|
|
| J1 | |
J4 | J6 | J5 |
|
|
| J8 |
|
| J7 |
| J10 |
|
| J9 |
J14 | J13 | J12 |
| J11 |
MDF |
|
|
| MDF |
connections |
|
| J36 | connections |
|
|
|
|
27320
Figure 3-10 shows the cabling between the voice lines on the PSC and the voice switching equipment that provides local POTS service. The cables listed in Table 3-5 are used for the connection.
Figure 3-10 PSC to MDF Cabling Diagram with Two-to-Two Cables—Voice Line
Connectors |
|
|
|
|
|
Cisco 6120 |
| J2 |
| J1 | J3 |
J4 |
| J6 | J5 |
|
|
| J8 | J10 |
| J9 | J7 |
|
|
|
| ||
POTS |
|
|
|
| POTS |
J14 |
| J13 | J12 |
| J11 |
service |
|
|
|
| service |
connections |
|
|
| J36 | connections |
|
|
|
|
|
27784
3.3 Direct Connect without a PSC Configuration Cables
In a Direct Connect without a PSC configuration, use only designated cables to connect the MC and the MDF. This section provides tables and illustrations for the following:
•
•
•
Note Some chassis connectors in the cabling diagrams are not used because they are specific to one of the other configurations of the Cisco 6100 Series system or because they are reserved for future use.
Cisco 6100 Series User Guide |