3 Cisco 6100 Series System Cables | 78-6643-01 09/27/99 |
3.2.1 MC to PSC Cables
You can use the following cables when you are cabling the MC to the PSC in a Direct Connect with a PSC configuration:
•One-to-one cables—Used to connect the MC to the PSC for systems using dual-port CAP or DMT-2 ATU-C modules. This cable is not recommended if you plan on expanding your system to quad-port xTU-C modules, which will be available in a future release.
•Two-to-one cables—Used to connect one MC to two PSCs for systems using dual-port and quad-port ATU-C modules. Quad-port ATU-C modules will be available in a future release.
One-to-One Cables
You can use one-to-one cables to connect the MC to the PSC for systems using dual-port CAP or DMT-2 ATU-C modules. Table 3-2 lists the backplane connectors and the part numbers for the basic one-to-one cables connecting the MC to the PSC in a Direct Connect with a PSC configuration.
Note Do not use this cable if you plan to expand the system to quad-port xTU-C modules, which will be available in future releases.
Table 3-2 | Connectors and Part Numbers for One-to-One Cables—MC to the PSC |
| Connections | | | |
| | | | |
Backplane Connector | Cisco Part Number | NetSpeed Part |
| | | |
MC | PSC | Kit | Subassembly | Number |
| | | | | |
J39 | J3 | CAB-61-014 | 72-1665-01 | 4100-021-01 | |
| | | | | |
J40 | J1 | CAB-61-014 | 72-1665-01 | 4100-021-01 | |
| | | | | |
J41 | J5 | CAB-61-014 | 72-1665-01 | 4100-021-01 | |
| | | | | |
J42 | J4 | CAB-61-014 | 72-1611-01 | 4100-021-02 | |
| | | | | |
J43 | J2 | CAB-61-014 | 72-1610-01 | 4100-021-03 | |
| | | | | |
J44 | J6 | CAB-61-014 | 72-1609-01 | 4100-021-04 | |
| | | | | |
Note When you use the one-to-one cable, see Table C-1 on page C-2 for port mapping information.
3-4Cisco 6100 Series User Guide