Cisco Systems 6100 appendix PSC to MDF Cables, MDF Modem Kit Subassembly

3 Cisco 6100 Series System Cables 78-6643-01 09/27/99

3.2.2 PSC to MDF Cables

You can use the following cables to connect the PSC to the MDF in a Direct Connect with a

PSC configuration:

•One-to-one cables—Used to connect the PSC to the MDF.

•Two-to-two cables—Used to clearly associate the mapping between the wire pairs and the MC/PSC ports. These cables attach to the PSC MDF connections (J11 to J14) and the PSC POTS connections (J7 to J10).

One-to-One Cables

You can use one-to-one cables to connect the PSC to the MDF or POTS service connectors. Table 3-4 lists the backplane connectors, the available cable lengths, and the part numbers for the one-to-one cables connecting the PSC to the MDF in a Direct Connect with a PSC configuration. Each cable has the same pinouts. The only difference between the four cables is the length. Use the length that works best for your configuration.

Table 3-4		Connectors, Lengths, and Part Numbers for One-to-One Cables—PSC to
		MDF or POTS Connections
Backplane Connector			Cisco Part Number
PSC	MDF Modem		Kit	Subassembly
MDF Connectors
J11, J12,	P1	(modems 1 to 16),	CAB-61-015	72-1599-01
J13, J14	P3	(modems 33 to 48),	50-ft cable
	P2	(modems 17 to 32), or
			CAB-61-016	72-1598-01
	P4	(modems 49 to 64)
			150-ft cable
			CAB-61-017	72-1597-01
			75-ft cable
			CAB-61-018	72-1596-01
			175-ft cable
POTS Connectors
J7, J8, J9,	P1	(modems 1 to 16),	CAB-61-015	72-1599-01
J10	P3	(modems 33 to 48),	50-ft cable
	P2	(modems 17 to 32), or
			CAB-61-016	72-1598-01
	P4	(modems 49 to 64)
			150-ft cable
			CAB-61-017	72-1597-01
			75-ft cable
			CAB-61-018	72-1596-01
			175-ft cable

Figure 3-5 shows the one-to-one cable.

Figure 3-5 One-to-One Cable

23704

P2 P1

3-8Cisco 6100 Series User Guide