Cisco Systems 6100 appendix PSC to MDF Cabling Diagram with One-to-One Cables

78-6643-01 09/27/99 Cisco 6100 Series System Cables 3

One-to-One Cables

You can use one-to-one cables to connect the PSC to the MDF or external voice equipment.

Table 3-10 lists the backplane connectors, the available cable lengths, and the part numbers for the one-to-one cables connecting the PSC to the MDF in a DOH configuration. Each cable has the same pinouts. The only difference between the four cables is the length. Use the length that works best for your configuration.

Table 3-10	Connectors, Lengths, and Part Numbers for One-to-One Cables—PSC to
	MDF Connections
Backplane Connector		Cisco Part Number
PSC		Kit	Subassembly
J11, J12, J13, J14		CAB-61-015	72-1599-01
or		50-ft cable
J7, J8, J9, J10		CAB-61-016	72-1598-01
		150-ft cable
		CAB-61-017	72-1597-01
		75-ft cable
		CAB-61-018	72-1596-01
		175-ft cable

Figure 3-18 shows the one-to-one cable described in Table 3-10.

Figure 3-18 One-to-One Cable

23704

P2 P1

Figure 3-19 shows the cabling between the PSC and the MDF in which the cables listed in

Table 3-10 are used.

Figure 3-19 PSC to MDF Cabling Diagram with One-to-One Cables

Cisco 6120	J2	J1
J4
		J3
J8	J6	J5
	J10	J7
		J9

MDF	J14	J13	J12	J11
connections
				J36

MDF

connections

27318

Cisco 6100 Series User Guide 3-19