Cisco Systems 6100 appendix DOH Configuration Cables, Basic DOH Component Cables

78-6643-01 09/27/99 Cisco 6100 Series System Cables 3

3.4 DOH Configuration Cables

In a DOH configuration, use only designated cables to connect the MC, LCC, PSC, and MDF. This section provides tables and illustrations for the following:

•

•

Basic component cables

PSC to MDF cables

Note Some chassis connectors in the cabling diagrams are not used because they are specific to one of the other configurations of the Cisco 6100 Series system or because they are reserved for future use.

3.4.1 Basic DOH Component Cables

You can use one-to-one cables to connect the MC, LCC, and PSC for systems using dual-port CAP ATU-C modules. Table 3-9 lists the backplane connectors and the part numbers for the basic one-to-one cables connecting the MC, LCC, and PSC in a DOH configuration.

Table 3-9	Connectors and Part Numbers for One-to-One Cables—MC, LCC, and PSC
	Connections
			Cisco Part Number		NetSpeed Part
Backplane Connector			Kit	Subassembly	Number
MC		LCC
J45		J25	CAB-61-011	72-1627-01	4100-014-01
J46		J26	CAB-61-011	72-1626-01	4100-014-02
J47		J29	CAB-61-011	72-1641-01	4100-030-02
LCC		LCC
J27		J25	CAB-61-012	72-1625-01	4100-014-03
J28		J26	CAB-61-012	72-1625-01	4100-014-03
J30		J29	CAB-61-012	72-1602-01	4100-030-01
LCC		PSC
J23		J6	CAB-61-013	72-1619-01	4100-016-01
J22		J5	CAB-61-013	72-1619-01	4100-016-01
J24		J4	CAB-61-013	72-1619-01	4100-016-01
J21		J3	CAB-61-013	72-1619-01	4100-016-01

Note When you use the one-to-one cable, see Table C-7 on page C-23 for port mapping information.

Cisco 6100 Series User Guide 3-17