© Siemens AG 2012
The SINVERT PVS CombinerBoxes are designed for vertical mounting.
The output side of the SINVERT PVS CombinerBoxes can be optionally equipped with or without a switch disconnector. CombinerBoxes with switch disconnectors are capable of disconnecting the connected section of the photovoltaic generator from the SINVERT PVS inverter, e.g. for mainte- nance work.
SINVERT PVS CombinerBox | 108 | 120 | 124 | 204 |
|
|
|
|
|
Number of inputs | 8 | 20 | 24 | 4 |
Maximum protection per input | 15 A | 20 A |
| 160 A |
Voltage | 1 000 V |
|
|
|
Switch disconnector | optional |
|
| |
Surge arrester | opt. |
|
| |
|
|
|
|
|
The SINVERT PVS CombinerBox 108 is optionally available with or without overvoltage protection, which is designed to protect the modules.
The inputs of the SINVERT PVS CombinerBoxes are protect- ed by fuses. The fuses are not included in the scope of sup- ply of the SINVERT PVS CombinerBox and must be ordered separately (see Selection and ordering data on page 25).
The SINVERT PVS CombinerBox has IP54 degree of protection and is rated for voltages up to 1 000 V.
SINVERT PVS in power plants 13